User:Jcreer/TUFLOW FV Dialogs: Difference between revisions
From XMS Wiki
Jump to navigationJump to search
| Line 5: | Line 5: | ||
===General=== | ===General=== | ||
*Bottom Drag Model | *Bottom Drag Model | ||
*CFL | *CFL – Default limit is 1. | ||
*Initial Water Level | *Initial Water Level – The initial condition above the bed at the downstream end. | ||
===Time=== | ===Time=== | ||
*Time Format | *Time Format | ||
Revision as of 18:07, 9 March 2016
Dialogs in TUFLOW FV have been built using the generic model interface.
TUFLOW FV Global Parameters
- Activate parameter group
General
- Bottom Drag Model
- CFL – Default limit is 1.
- Initial Water Level – The initial condition above the bed at the downstream end.
Time
- Time Format
- Start Time
- End Time
Output
- Output Dir
- SMS Dat Output
- Dat Output Types
- Dat Output Interval
- Flux Output
- Flux Output Interval
HD Parameters
- horizontal eddy viscosity calculation
- Global horizontal eddy viscosity
Advanced Parameters
- Command 1
- Command 2
TUFLOW FV Material Properties
The TUFLOW FV Material Properties dialog allows setting the roughness for materials defined in the general Materials Data dialog.
TUFLOW FV Nodestring Boundary Conditions
- Flow
- Water Level
