SMS:Layout

From XMS Wiki
Revision as of 15:21, 19 January 2016 by Jcreer (talk | contribs)
Jump to navigationJump to search
SMS layout

At a glance

  • The project explorer shows data currently loaded in project
  • Menu bar depends upon the active module and model
  • Edit window show x, y, z, scalar, and vector values
  • Edit window values can be edited in some circumstances
  • The status window on the bottom of the graphics window shows coordinates and selection information
  • Help information is displayed at the bottom of the SMS screen
  • Several toolbars are used in SMS. The dynamic tools change based upon the current module.


The interface to SMS has been designed in a modular fashion. Separate modules are used for each data type. As switching from one module to another, the available menus and tools change. Inside the modules, a numeric model can be associated with a mesh or grid. When that grid is active, the tools and menus for the associated model are also enabled.

The SMS screen includes several toolbars, edit fields, and menus. Some of these change when switching modules or numerical models. The main components include:

  • Menu Bar – Menu commands to issue commands. These change as the module and model change.
  • Edit Window – Fields directly below the menu bar showing the coordinates and function values for selected entities.
  • Graphics Window – Display panel to show the data being manipulated.
  • Project Explorer (Data Tree) – Tree representation of all the data currently referenced through SMS.
  • Time Step Window – Appears when transient data is available.
  • Toolbars – Several toolbars can be displayed. For more information on each toolbar, see the Toolbars article.
  • Help or Status Window

Normally the Main Graphics Window fills the majority of the screen; however, plot windows can also be opened to display 2D plots of various data. The toolbars, project explorer, time steps window and edit window are dockable windows. Dockable windows may be positioned anywhere on the screen.