User:Jcreer/SMS:SRH-2D Changes
From XMS Wiki
Jump to navigationJump to search
 |
This contains information about functionality available starting at SMS version 13.4. The content may not apply to other versions. |
 |
At release, apply updates here: SMS:Simulations#Monitoring_Data
Monitoring Data
The Simulation Run Queue contains an option for Monitoring Data. Turning on this option activates the tabs underneath for the selected simulation. The tabs are:
- Command Line – Shows the command line entries for the selected process. Reports errors encountered during the simulation run.
- Residual Plot – Shows the residual plot for the selected simulation.
- Monitor Point Plot – If monitor points are included in the simulation, this shows a plot for the point location once the simulation has included the point in the simulation run.
- Monitor Line Q Plot – If monitor lines are included in the simulation, this shows a plot for the line location once the simulation has included the line in the simulation run.
- Monitor Line QS Plot – If monitor lines are included in the simulation, this shows a plot for the line location once the simulation has included the line in the simulation run.
