HY8:Culvert Crossing Data: Difference between revisions
No edit summary |
|||
| Line 1: | Line 1: | ||
==Input Crossing and Culvert data== | ==Input Crossing and Culvert data== | ||
The user may choose up to 99 barrels for each culvert that is defined by the same site conditions, shape configuration, culvert type, and "n", and/or up to 6 independent culverts. In both cases the culverts share the same headwater pool, tailwater pool or channel, and roadway characteristics. The input properties define the crossing and culvert. The data defining each culvert are entered in the input parameters widow. This window is accessed from the ''File'' menu, or from Project Explorer window by right-clicking on the culvert or crossing and selecting '''Culvert Crossing Data''' from the list. The user may also select the culvert properties icon from the tool bar . From the ''Culvert Crossing Data'' window, the site, culvert, tailwater, discharge, and roadway data are all entered. | The user may choose up to 99 barrels for each culvert that is defined by the same site conditions, shape configuration, culvert type, and "n", and/or up to 6 independent culverts. In both cases the culverts share the same headwater pool, tailwater pool or channel, and roadway characteristics. The input properties define the crossing and culvert. The data defining each culvert are entered in the input parameters widow. This window is accessed from the ''File'' menu, or from Project Explorer window by right-clicking on the culvert or crossing and selecting '''Culvert Crossing Data''' from the list. The user may also select the culvert properties [[File:CulverCrossingDataIcon.png]] icon from the tool bar . From the ''Culvert Crossing Data'' window, the site, culvert, tailwater, discharge, and roadway data are all entered. | ||
Revision as of 15:47, 15 September 2016
Input Crossing and Culvert data
The user may choose up to 99 barrels for each culvert that is defined by the same site conditions, shape configuration, culvert type, and "n", and/or up to 6 independent culverts. In both cases the culverts share the same headwater pool, tailwater pool or channel, and roadway characteristics. The input properties define the crossing and culvert. The data defining each culvert are entered in the input parameters widow. This window is accessed from the File menu, or from Project Explorer window by right-clicking on the culvert or crossing and selecting Culvert Crossing Data from the list. The user may also select the culvert properties 
icon from the tool bar . From the Culvert Crossing Data window, the site, culvert, tailwater, discharge, and roadway data are all entered.
Culvert Crossing Data Window
All of the parameters necessary to define crossing and culvert information can be defined from the Culvert/Crossing Data window as shown below.
