GMS:SIP Package: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
Line 11: Line 11:
This value must be greater than zero and is usually 1.0.
This value must be greater than zero and is usually 1.0.


===Head Change Criterion For Convergence===
===Head Change Criterion for Convergence===
When the maximum absolute value of head change from all cells during an iteration is less than or equal to the head change criterion, solver iteration stops.
When the maximum absolute value of head change from all cells during an iteration is less than or equal to the head change criterion, solver iteration stops.


Revision as of 16:07, 28 November 2017

MODFLOW
Pre-processing
MODFLOW Commands
Building a MODFLOW Model
Map to MODFLOW
Calibration
Packages Supported in GMS
Saving a MODFLOW Simulation
Importing MODFLOW Files
Unsupported MODFLOW Features
Run MODFLOW
Post-processing
MODFLOW Display Options
MODFLOW Post-Processing Viewing Options
Reading a MODFLOW Simulation
Tutorials
Packages
Flow: BCF6, HUF, LPF, UPW
Solvers:

DE4, GMG, NWT, PCG,

PCGN, LMG, SIP, SOR,

SMS
Other:

BAS6, BFH, CHD1, CLN,

DRN1, DRT1, EVT1, ETS1,

GAGE, GHB1, GNC, HFB1,

HUF, LAK3, MNW1, MNW2,

OUT1, RCH1, RIV1, SFR2,

STR1, SUB1, SWI2, WEL1,

UZF1
v • e

The SIP (Strongly Implicit Package) solver package is one of the solver packages for MODFLOW supported by GMS.

Maximum Iterations Per Time Step

This value is the maximum number of times through the iteration loop in one time step in an attempt solve the system of finite-difference equations.

Number of Iteration Parameters

Five variables are generally sufficient.

Acceleration Parameter

This value must be greater than zero and is usually 1.0.

Head Change Criterion for Convergence

When the maximum absolute value of head change from all cells during an iteration is less than or equal to the head change criterion, solver iteration stops.

Print Out Interval

The maximum absolute head change is printed for each iteration of a time step whenever the time step is an even multiple of the print out interval. The printout also occurs at the end of each stress period regardless of the print out interval.

Iteration Parameter Seed

These options control the seed for calculating iteration variables. Either specify the seed yourself or have MODFLOW calculate it.

Reset

This button will change all options to the default state.

The MODFLOW SIP Package dialog.


v • e
GMS – Groundwater Modeling System
Modules:2D Grid  •  2D Mesh  •  2D Scatter Point  •  3D Grid  •  3D Mesh  •  3D Scatter Point  •  Boreholes  •  GIS  •  Map  •  Solid  •  TINs  •  UGridsGMS Logo2.png
Models:FEFLOW  •  FEMWATER  •  HydroGeoSphere  •   MODAEM  •  MODFLOW  •  MODPATH  •  mod-PATH3DU  •  MT3DMS  •  MT3D-USGS  •  PEST  •  PHT3D  •  RT3D  •  SEAM3D  •  SEAWAT  •  SEEP2D  •  T-PROGS  •  ZONEBUDGET
Aquaveo
Retrieved from "https://www.xmswiki.com/index.php?title=GMS:SIP_Package&oldid=132840"