User:Jcreer/MDOFLOW 6 New Packages: Difference between revisions

Revision as of 18:54, 19 July 2021

MF6 BUY Package

The Buoyancy (BUY) Package dialog

The Buoyancy (BUY) Package dialog is accessed by double-clicking on the BUY package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options:

Sections list – A list of sections that can be turned on or off:
- Comments – Turn on to make the Comments section visible.
- Options – Turn on to make the Options section visible.
- PACKAGEDATA – Turn on to make the PACAKGEDATA section visible. This section is on by default.
Comments section – Enter general alphanumeric comments. Comments entered here get written at the top of the file, preceded by a '#' symbol.
Options section – Temporal options and settings:
- HHFORMULATION_RHS
- DENSEREF
- DENSITY FILEOUT
PACKAGEDATA section – Contains the following:
- Add Rows
- IRHOSPEC
- DRHODC
- CRHOREF
- MODELNAME
- AUXSPECIESNAME

MF6 CSUB Package

The Skeletal Storage, Compaction, and Subsidence (CSUB) Package dialog

The Skeletal Storage, Compaction, and Subsidence (CSUB) Package dialog is accessed by double-clicking on the CSUB package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options:

Sections list – A list of sections that can be turned on or off:
- COMMENTS – Turn on to make the COMMENTS section visible.
- OPTIONS – Turn on to make the OPTIONS section visible.
- GRIDDATA – Turn on to make the GRIDDATA section visible.
- DATA – Turn on to make the DATA section visible. This section is on by default.
COMMENTS section – Enter general alphanumeric comments. Comments entered here get written at the top of the file, preceded by a '#' symbol.
OPTIONS section – Options and settings:
- BOUNDNAMES
- PRINT_INPUT
- SAVE_FLOWS
- GAMMAW
- BETA
- HEAD_BASED
- INITIAL_PRECONSOLIDATION_HEAD
- NDELAYCELLS
- COMPRESSION_INDICES
- UPDATE_MATERIAL_PROPERTIES
- CELL_FRACTION
- SPECIFIED_INITIAL_INTERBED_STATE
- SPECIFIED_INITIAL_PRECONSOLIDATION_STRESS
- SPECIFIED_INITIAL_DELAY_HEAD
- EFFECTIVE_STRESS_LAG
- STRAIN_CSV_INTERBED
- STRAIN_CSV_COARSE
- COMPACTION
- COMPACTION_ELASTIC
- COMPACTION_INELASTIC
- COMPACTION_COARSE
- ZDISPLACEMENT
- PACKAGE_CONVERGENCE
- TS6 FILEIN
- OBS6 FILEIN
GRIDDATA section – Contains the following:
- Dataset to Array...
- CG_SKE_CR
- CG_THETA
- SGM
- SGS
DATA section – Contains the following:
- PACKAGEDATA
- PERIODS

MF6 ADV Package

The Advection (ADV) Package dialog

The Advection (ADV) Package dialog is accessed by double-clicking on the ADV package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options:

Sections list – A list of sections that can be turned on or off:
- COMMENTS – Turn on to make the COMMENTS section visible.
- OPTIONS – Turn on to make the OPTIONS section visible.
COMMENTS section – Enter general alphanumeric comments. Comments entered here get written at the top of the file, preceded by a '#' symbol.
OPTIONS section – Options and settings:
- SCHEME

MF6 CNC Package

The Constant Concentration (CNC) Package dialog

The Constant Concentration (CNC) Package dialog is accessed by double-clicking on the CNC package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options:

Sections list – A list of sections that can be turned on or off:
- COMMENTS – Turn on to make the COMMENTS section visible.
- OPTIONS – Turn on to make the OPTIONS section visible.
- PERIODS – Turn on to make the PERIODS section visible.
COMMENTS section – Enter general alphanumeric comments. Comments entered here get written at the top of the file, preceded by a '#' symbol.
OPTIONS section – Options and settings:
- AUXILIARY
- AUXMULTNAME
- BOUNDNAMES
- PRINT_INPUT
- PRINT_FLOWS
- SAVE_FLOWS
- TS6 FILEIN
- OBS6 FILEIN
PERIODS section – ...
- Period
- Define Period
- Delete Period
- Add Rows
- Delete Rows
- Plot All Periods
- Open Time Series
- Filter on Selected Cells
- LAY
- ROW
- COL
- CONC

MF6 DSP Package

The Dispersion (DSP) Package dialog

The Dispersion (DSP) Package dialog is accessed by double-clicking on the DSP package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options:

Sections list – A list of sections that can be turned on or off:
- COMMENTS – Turn on to make the COMMENTS section visible.
- OPTIONS – Turn on to make the OPTIONS section visible.
- GRIDDATA – Turn on to make the GRIDDATA section visible.
COMMENTS section – Enter general alphanumeric comments. Comments entered here get written at the top of the file, preceded by a '#' symbol.
OPTIONS section – Options and settings:
- XT3D_OFF
- XT3D_RHS
GRIDDATA section – ...
- Dataset to Array...
- Define
- Layered
- Constant
- DIFFC
- ALH
- ALV
- ATH1
- ATH2
- ATV

MF6 DISV Package

The Discretization by Vertices (DISV) Package dialog

The Discretization by Vertices (DISV) Package dialog is accessed by double-clicking on the DISV package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options:

Sections list – A list of sections that can be turned on or off:
- COMMENTS – Turn on to make the COMMENTS section visible.
- OPTIONS – Turn on to make the OPTIONS section visible.
- DIMENSIONS – Turn on to make the DIMENSIONS section visible.
- GRIDDATA – Turn on to make the GRIDDATA section visible.
- VERTICES – Turn on to make the VERTICES section visible.
- CELL2D – Turn on to make the CELL2D section visible.
COMMENTS section – Enter general alphanumeric comments. Comments entered here get written at the top of the file, preceded by a '#' symbol.
OPTIONS section – Options and settings:
- LENGTH_UNITS
- NOGRB
- XORIGIN
- YORIGIN
- ANGROT
DIMENSIONS section – ...
- Number of layers (NLAY)
- Number of cells per layer (NCPL)
- Number of vertices (NVERT)
GRIDDATA section – ...
- Dataset to Array...
- Define
- Layered
- Constant
- TOP
- BOTM
- IDOMAIN
VERTICES section – ...
CELL2D section – ...

MF6 DISU Package

The Unstructured Discretization (DISU) Package dialog

The Unstructured Discretization (DISU) Package dialog is accessed by double-clicking on the DISU package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options:

Sections list – A list of sections that can be turned on or off:
- COMMENTS – Turn on to make the COMMENTS section visible.
- OPTIONS – Turn on to make the OPTIONS section visible.
- DIMENSIONS – Turn on to make the DIMENSIONS section visible.
- GRIDDATA – Turn on to make the GRIDDATA section visible.
- CONNECTIONDATA – Turn on to make the CONNECTIONDATA section visible.
- VERTICES – Turn on to make the VERTICES section visible.
- CELL2D – Turn on to make the CELL2D section visible.
COMMENTS section – Enter general alphanumeric comments. Comments entered here get written at the top of the file, preceded by a '#' symbol.
OPTIONS section – Options and settings:
- LENGTH_UNITS
- NOGRB
- XORIGIN
- YORIGIN
- ANGROT
DIMENSIONS section – ...
- Number of nodes (NODES)
- Number of connections and nodes (NJA)
- Number of vertices (NVERT)
GRIDDATA section – ...
- TOP
- BOT
- AREA
- IDOMAIN
CONNECTIONDATA section – ...
- IAC
- JA
- IHC
- CL12
- HWVA
- ANGLDEGX
VERTICES section – ...
CELL2D section – ...

MF6 FMI Package

The Flow Model Interface (FMI) Package dialog

The Flow Model Interface (FMI) Package dialog is accessed by double-clicking on the FMI package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options:

Sections list – A list of sections that can be turned on or off:
- COMMENTS – Turn on to make the COMMENTS section visible.
- OPTIONS – Turn on to make the OPTIONS section visible.
- PACKAGEDATA – Turn on to make the PACKAGEDATA section visible.
COMMENTS section – Enter general alphanumeric comments. Comments entered here get written at the top of the file, preceded by a '#' symbol.
OPTIONS section – Options and settings:
- FLOW_IMBALANCE_CORRECTION
PACKAGEDATA section – ...
- Let GMS determine the paths from the flow simulation when saving
  - Select Flow Simulation...
- Add Rows...
- FLOWTYPE
- FNAME

MF6 GWT Package

The Groundwater Transport (GWT) Model Name File dialog

The Groundwater Transport (GWT) Model Name File dialog is accessed by double-clicking on the GWT model under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options:

Sections list – A list of sections that can be turned on or off:
- COMMENTS – Turn on to make the COMMENTS section visible.
- OPTIONS – Turn on to make the OPTIONS section visible.
- PACKAGES – Turn on to make the PACKAGES section visible.
COMMENTS section – Enter general alphanumeric comments. Comments entered here get written at the top of the file, preceded by a '#' symbol.
OPTIONS section – Options and settings:
- LIST
- PRINT_INPUT
- PRINT_FLOWS
- SAVE_FLOWS
PACKAGES section – ...
- ftype
- fname
- pname

MF6 IST Package

The Immobile Storage and Transfer (IST) Package dialog

The Immobile Storage and Transfer (IST) Package dialog is accessed by double-clicking on the IST package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options:

Sections list – A list of sections that can be turned on or off:
- COMMENTS – Turn on to make the COMMENTS section visible.
- OPTIONS – Turn on to make the OPTIONS section visible.
- GRIDDATA – Turn on to make the GRIDDATA section visible.
COMMENTS section – Enter general alphanumeric comments. Comments entered here get written at the top of the file, preceded by a '#' symbol.
OPTIONS section – Options and settings:
- SAVE_FLOWS
- SORPTION
- FIRST_ORDER_DECAY
- ZERO_ORDER_DECAY
- CIM FILEOUT
- CIM PRINT_FORMAT
GRIDDATA section – ...
- CIM
- THETAIM
- ZETAIM
- DECAY
- DECAY_SORBED
- BULK_DENSITY
- DISTCOEF

MF6 LKT Package

The Lake Transport (LKT) Package dialog

The Lake Transport (LKT) Package dialog is accessed by double-clicking on the LKT package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options:

Sections list – A list of sections that can be turned on or off:
- COMMENTS – Turn on to make the COMMENTS section visible.
- OPTIONS – Turn on to make the OPTIONS section visible.
- DATA – Turn on to make the DATA section visible.
COMMENTS section – Enter general alphanumeric comments. Comments entered here get written at the top of the file, preceded by a '#' symbol.
OPTIONS section – Options and settings:
- FLOW_PACKAGE_NAME
- AUXILIARY
- FLOW_PACKAGE_AUXILIARY_NAME
- BOUNDNAMES
- PRINT_INPUT
- PRINT_CONCENTRATION
- PRINT_FLOWS
- SAVE_FLOWS
- CONCENTRATION FILEOUT
- BUDGET FILEOUT
- TS6 FILEIN
- OBS6 FILEIN
DATA section – ...
- PACKAGEDATA
- PERIODS

MF6 MST Package

The Mobile Storage and Transfer (MST) Package dialog

The Mobile Storage and Transfer (MST) Package dialog is accessed by double-clicking on the MST package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options:

Sections list – A list of sections that can be turned on or off:
- COMMENTS – Turn on to make the COMMENTS section visible.
- OPTIONS – Turn on to make the OPTIONS section visible.
- GRIDDATA – Turn on to make the GRIDDATA section visible.
COMMENTS section – Enter general alphanumeric comments. Comments entered here get written at the top of the file, preceded by a '#' symbol.
OPTIONS section – Options and settings:
- SAVE_FLOWS
- FIRST_ORDER_DECAY
- ZERO_ORDER_DECAY
- SORPTION
GRIDDATA section – ...
- POROSITY
- DECAY
- DECAY_SORBED
- BULK_DENSITY
- DISTCOEF
- SP2

MF6 MVT Package

The Mover Transport (MVT) Package dialog

The Mover Transport (MVT) Package dialog is accessed by double-clicking on the MVT package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options:

Sections list – A list of sections that can be turned on or off:
- COMMENTS – Turn on to make the COMMENTS section visible.
- OPTIONS – Turn on to make the OPTIONS section visible.
COMMENTS section – Enter general alphanumeric comments. Comments entered here get written at the top of the file, preceded by a '#' symbol.
OPTIONS section – Options and settings:
- PRINT_INPUT
- PRINT_FLOWS
- SAVE_FLOWS
- BUDGET FILEOUT

MF6 MWT Package

The Multi-Aquifer Well Transport (MWT) Package dialog

The Multi-Aquifer Well Transport (MWT) Package dialog is accessed by double-clicking on the MWT package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options:

Sections list – A list of sections that can be turned on or off:
- COMMENTS – Turn on to make the COMMENTS section visible.
- OPTIONS – Turn on to make the OPTIONS section visible.
- DATA – Turn on to make the DATA section visible.
COMMENTS section – Enter general alphanumeric comments. Comments entered here get written at the top of the file, preceded by a '#' symbol.
OPTIONS section – Options and settings:
- FLOW_PACKAGE_NAME
- AUXILIARY
- FLOW_PACKAGE_AUXILIARY_NAME
- BOUNDNAMES
- PRINT_INPUT
- PRINT_CONCENTRATION
- PRINT_FLOWS
- SAVE_FLOWS
- CONCENTRATION FILEOUT
- BUDGET FILEOUT
- TS6 FILEIN
- OBS6 FILEIN
DATA section – ...
- PACKAGEDATA
- PERIODS

MF6 SFT Package

The Streamflow Transport (SFT) Package dialog

The Streamflow Transport (SFT) Package dialog is accessed by double-clicking on the SFT package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options:

Sections list – A list of sections that can be turned on or off:
- COMMENTS – Turn on to make the COMMENTS section visible.
- OPTIONS – Turn on to make the OPTIONS section visible.
- DATA – Turn on to make the DATA section visible.
COMMENTS section – Enter general alphanumeric comments. Comments entered here get written at the top of the file, preceded by a '#' symbol.
OPTIONS section – Options and settings:
- FLOW_PACKAGE_NAME
- AUXILIARY
- FLOW_PACKAGE_AUXILIARY_NAME
- BOUNDNAMES
- PRINT_INPUT
- PRINT_CONCENTRATION
- PRINT_FLOWS
- SAVE_FLOWS
- CONCENTRATION FILEOUT
- BUDGET FILEOUT
- TS6 FILEIN
- OBS6 FILEIN
DATA section – ...
- PACKAGEDATA
- PERIODS

MF6 SRC Package

MF6 SSM Package

MF6 UZT Package

Arrays to Datasets

GWF-GWF Exchange

GWF-GWT Exchange

MODFLOW 6 GWF/GWT Display Options

MODFLOW 6 GWF/GWF Display Options

@@ Line 357: / Line 357: @@
 ==MF6 SFT Package==
+[[File:MF6-SFT package.png|thumb|500px|right|The ''Streamflow Transport (SFT) Package'' dialog]]
+The ''Streamflow Transport (SFT) Package'' dialog is accessed by double-clicking on the SFT package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options:
+*''Sections'' list &ndash; A list of sections that can be turned on or off:
+**''COMMENTS'' &ndash; Turn on to make the ''COMMENTS'' section visible.
+**''OPTIONS'' &ndash; Turn on to make the ''OPTIONS'' section visible.
+**''DATA'' &ndash; Turn on to make the ''DATA'' section visible.
+*''COMMENTS'' section &ndash; Enter general alphanumeric comments. Comments entered here get written at the top of the file, preceded by a '#' symbol.
+*''OPTIONS'' section &ndash; Options and settings:
+** FLOW_PACKAGE_NAME
+** AUXILIARY
+** FLOW_PACKAGE_AUXILIARY_NAME
+** BOUNDNAMES
+** PRINT_INPUT
+** PRINT_CONCENTRATION
+** PRINT_FLOWS
+** SAVE_FLOWS
+** CONCENTRATION FILEOUT
+** BUDGET FILEOUT
+** TS6 FILEIN
+** OBS6 FILEIN
+*''DATA'' section &ndash; ...
+** PACKAGEDATA
+** PERIODS
+{{-}}
 ==MF6 SRC Package==