Template:Interpolate Priority Rasters: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
Line 1: Line 1:
__NOINDEX__
__NOINDEX__
===Interpolate Priority Rasters===
===Interpolate Priority Rasters===
This tool interpolates multiple rasters to a UGrid with priority. Each source is added to the list in priority order.  If a value is not obtained when interpolating from the highest priority source, the tool looks for a value in the next source until either a value is found or all sources are exhausted. The tool has the following options:
====Tool description====
The ''Interpolate Priority Rasters'' tool creates a new dataset for a selected geometry (UGrid/Mesh2D/Scatter Set) by interpolating from multiple rasters according to a user specified priority. Each source is added to the list in priority order.  If a value is not obtained when interpolating from the highest priority source, the tool looks for a value in the next source until either a value is found or all sources are exhausted.
 
It should be noted that rasters from different sources may have errors or differences from one another for a variety of  reasons. Principal causes of incompatibilities between rasters include the changes between the times when each source was gathered, differences in survey methods, and slight adjustments to datums. Large raster differences can result in discontinuities in the surface. These discontinuities can have ramifications on the hydraulic results for simulations of flow over the combined surface.
 
Observation profiles can be extracted from the surfaces to visualize the differences. If significant differences exist, the [[Template:Blend Raster to Edges| Blend Raster to Edges]] tool and the [[Template:Clip Raster from Elevation|Clip Raster from Elevations]] tool can be used to correct them.
 
It should be noted that the output dataset must be mapped to be the ''Elevation'' of the target geometry if that is desired. It is not mapped automatically.
 
====Input parameters====
*''Grid'' – This option allows you to select the geometry that will receive the interpolated rasters.
*''Grid'' – This option allows you to select the geometry that will receive the interpolated rasters.
*''Default value option'' – This option will allow you to select the default value for interpolation. Depending on the selection, options may be added to the dialog.
*''Default value option'' – This option will allow you to select the default value for interpolation. Depending on the selection, options may be added to the dialog.
Line 9: Line 18:
***''Default dataset'' – This option allows you to select which dataset will be the default.
***''Default dataset'' – This option allows you to select which dataset will be the default.
**"Raster data" – The default value option is Raster data. There will be no extra options for this selection.
**"Raster data" – The default value option is Raster data. There will be no extra options for this selection.
*''Output dataset name'' – Allows setting the name of the new interpolated raster.
*''Raster 1 (highest priority)'' – Select the raster that will be given highest priority during the interpolation process.
*''Raster 1 (highest priority)'' – Select the raster that will be given highest priority during the interpolation process.
*''Raster 2'' – Select the raster that will be given the next highest priority during the interpolation process.
*''Raster 2'' – Select the raster that will be given the next highest priority during the interpolation process.
*''Raster n'' – Additional rasters may be selected and given priority in the order they are selected.
*''Raster n'' – Additional rasters may be selected and given priority in the order they are selected.
====Output parameters====
*''Output dataset name'' – Allows setting the name of the new dataset on the specified mesh, UGrid, or scatter set.
====Current Location in toolbox====
Rasters/Interpolate Priority Rasters
====Related Tools====
* [[Template:Blend Raster to Edges| Blend Raster to Edges]]
* [[Template:Clip Raster from Elevation|Clip Raster from Elevations]]
* [[Template:Merge Elevation Rasters|Merge Elevation Rasters]]
{{-}}
{{-}}
<noinclude>[[Category:Tools]]</noinclude>
<noinclude>[[Category:Tools]]</noinclude>

Revision as of 20:37, 19 October 2021

Interpolate Priority Rasters

Tool description

The Interpolate Priority Rasters tool creates a new dataset for a selected geometry (UGrid/Mesh2D/Scatter Set) by interpolating from multiple rasters according to a user specified priority. Each source is added to the list in priority order. If a value is not obtained when interpolating from the highest priority source, the tool looks for a value in the next source until either a value is found or all sources are exhausted.

It should be noted that rasters from different sources may have errors or differences from one another for a variety of reasons. Principal causes of incompatibilities between rasters include the changes between the times when each source was gathered, differences in survey methods, and slight adjustments to datums. Large raster differences can result in discontinuities in the surface. These discontinuities can have ramifications on the hydraulic results for simulations of flow over the combined surface.

Observation profiles can be extracted from the surfaces to visualize the differences. If significant differences exist, the Blend Raster to Edges tool and the Clip Raster from Elevations tool can be used to correct them.

It should be noted that the output dataset must be mapped to be the Elevation of the target geometry if that is desired. It is not mapped automatically.

Input parameters

  • Grid – This option allows you to select the geometry that will receive the interpolated rasters.
  • Default value option – This option will allow you to select the default value for interpolation. Depending on the selection, options may be added to the dialog.
    • "Constant" – The default value option is Constant. This selection adds the Default constant value option.
      • Default constant value – This option allows you to set a constant value which will be the default.
    • "Dataset" – The default value option is Dataset. This selection adds the Default dataset option.
      • Default dataset – This option allows you to select which dataset will be the default.
    • "Raster data" – The default value option is Raster data. There will be no extra options for this selection.
  • Raster 1 (highest priority) – Select the raster that will be given highest priority during the interpolation process.
  • Raster 2 – Select the raster that will be given the next highest priority during the interpolation process.
  • Raster n – Additional rasters may be selected and given priority in the order they are selected.

Output parameters

  • Output dataset name – Allows setting the name of the new dataset on the specified mesh, UGrid, or scatter set.

Current Location in toolbox

Rasters/Interpolate Priority Rasters

Related Tools


Retrieved from "https://www.xmswiki.com/index.php?title=Template:Interpolate_Priority_Rasters&oldid=151067"