HY8:Contra Costa Basin: Difference between revisions
From XMS Wiki
Jump to navigationJump to search
No edit summary |
No edit summary |
||
| Line 5: | Line 5: | ||
* End Sill Height to Maximum Depth Ratio -- ratio to determine the end sill height from the maximum depth. | * End Sill Height to Maximum Depth Ratio -- ratio to determine the end sill height from the maximum depth. | ||
* Basin Width -- The channel width is recommended for the basin width. | * Basin Width -- The channel width is recommended for the basin width. | ||
The following figures show the design of a Contra Costa basin. | The following figures show the design of a Contra Costa basin. | ||
| Line 14: | Line 14: | ||
* D -- Diameter of culvert | * D -- Diameter of culvert | ||
* | * y<sub>0</sub> -- Outlet depth | ||
* | * y<sub>2</sub> -- Approximate maximum water surface depth | ||
* | * y<sub>3</sub> -- Basin exit velocity | ||
* | * V<sub>0</sub> -- Outlet velocity | ||
* | * V<sub>2</sub> -- Exit velocity | ||
* | * h<sub>1</sub> -- Height of small baffle | ||
* | * h<sub>2</sub> -- Height of large baffle | ||
* | * h<sub>3</sub> -- Height of end sill | ||
* | * L<sub>2</sub> -- Length from culvert exit to large baffle | ||
* | * L<sub>3</sub> -- Length from large baffle to end sill | ||
* | * L<sub>B</sub> -- Basin length | ||
{{HY8Main}} | {{HY8Main}} | ||
Revision as of 21:32, 16 December 2011
Contra Costa Basin
The input variables required for this calculation is the following:
- Baffle Block Height Ratio -- The ratio of the baffle block height to baffle block distance from the culvert.
- End Sill Height to Maximum Depth Ratio -- ratio to determine the end sill height from the maximum depth.
- Basin Width -- The channel width is recommended for the basin width.
The following figures show the design of a Contra Costa basin.
Variables from the figure
- D -- Diameter of culvert
- y0 -- Outlet depth
- y2 -- Approximate maximum water surface depth
- y3 -- Basin exit velocity
- V0 -- Outlet velocity
- V2 -- Exit velocity
- h1 -- Height of small baffle
- h2 -- Height of large baffle
- h3 -- Height of end sill
- L2 -- Length from culvert exit to large baffle
- L3 -- Length from large baffle to end sill
- LB -- Basin length
