|
|
| (2 intermediate revisions by the same user not shown) |
| Line 1: |
Line 1: |
| The ''Job Control'' dialog of MODRAT is used to set several options which affect the duration MODRAT will model and the data it will use for input. This dialog is pictured below.
| | #REDIRECT [[WMS:MODRAT Job Control Parameters]] |
| | |
| | |
| [[Image:image201.jpg]]
| |
| | |
| | |
| ==Input File Names (MODRAT)==
| |
| Enter the prefix you want for MODRAT files (input and output), then click the Update Prefixes button to assign this prefix to the Reservoir file, Input hydrograph file, and output files listed in the ''Job Control'' dialog.
| |
| | |
| ==Rain File==
| |
| Enter the name of the file that will contain the rainfall mass curves to be used by MODRAT. This file will be created by WMS – you can name it anything you think appropriate.
| |
| | |
| ==Soil File==
| |
| The file containing soil type information for MODRAT should be entered in this field. This is generally the standard file created by the LACDPW named LASOILX.DAT.
| |
| | |
| A user-defined soil type file may be created and the name entered in this field if any soil number not included in the standard file of 2-172 or 202-372 is used. This file must be sequentially numbered and be in the standard MODRAT soil file format. The easiest way to create this file is to copy the standard L.A. County Soil file (LASOILX.DAT), then add additional soil numbers and data to the end of it, beginning with number 373.
| |
| | |
| ==Reservoir File==
| |
| Enter the name of the file that will contain the reservoir storage-capacity and elevation-discharge curves to be used by MODRAT. If you have defined the reservoir with the ''Detention Basin Calculator'' in WMS, this file will be created by WMS – you can name it anything you think appropriate. If you have manually created this file in the format required by MODRAT, you can enter the name of the file here.
| |
| | |
| ==Input Hydrograph File==
| |
| If an input hydrograph has been specified at any location in your watershed, the name of the file containing the appropriate data must be entered here. The file must contain all input hydrographs for the watershed if more than one is specified; the order of the hydrographs in the file must be from upstream to downstream. In other words, if an input hydrograph is specified at 1A and 5B, the data for the hydrograph at 1A must come first in the input file, followed by the data for 5B. The format of the hydrograph data file is identical to the hydrograph output file created by MODRAT (the *.hyf file).
| |
| | |
| Toggle the ''Write *.HYF'' check box on to have WMS write the *.hyf file using input hydrograph data that you entered in the [[WMS:MODRAT Edit Parameters|Edit MODRAT Parameters]] dialog.
| |
| | |
| | |
| ==Related Topics==
| |
| * [[WMS:MODRAT Job Control Parameters|Job Control Parameters]]
| |
| * [[WMS:MODRAT Edit Parameters|Editing MODRAT Parameters]]
| |
| * [[WMS:MODRAT Input/Output Hydrographs|I/O]]
| |
| * [[WMS:MODRAT Rainfall|Rainfall]]
| |
| * [[WMS:MODRAT Soil Type|Soil Type]]
| |
| * [[WMS:MODRAT Reservoirs|Reservoirs]]
| |
| * [[WMS:Saving and Reading MODRAT Files|Saving and Reading MODRAT Files]]
| |
| | |
| | |
| {{WMSMain}}
| |
