Template:SMS Breaklines Workflow: Difference between revisions

Revision as of 20:11, 2 September 2015

1. Create nodestrings/breaklines.
Select the Create Breakline tool. Click along points of a common elevation, such as at a bank toe or levee crest, to connect these points in the surface. Use the Backspace key to back up if an erroneous selection is made. Double-click or press Enter key to complete the breakline.

2. Import breaklines.
Breaklines can be imported as a scatter set using the File Import Wizard.

3. Force breaklines in a mesh.
Use the Force Breaklines command in the Nodestrings menu. Set breakline options in the Nodestring Options dialog.

4. Force breaklines in a scatter set.
Use the Force Breaklines command in the Breaklines menu. Set breakline options in the Scatter Breakline Options dialog.

@@ Line 5: / Line 5: @@
 |
 {{SMS Create Nodestrings and Breaklines}}
-:# Select the create nodestring/breakline tool (depending on the module).
-:# Click along points of a common feature, such as a bank toe or levee crest, to connect these points in the surface.
-:# Use the ''Backspace'' key to back up if an erroneous selection is made.
-:# Double-click or press ''Enter'' key to complete the nodestring/breakline.
 |}
 {|class="mw-collapsible mw-collapsed" style="width:100%; border:1px solid #D0E0FF; margin-bottom:0.4em;"