|
|
| Line 1: |
Line 1: |
| The version of HEC-1 distributed with WMS can be run directly from WMS by using the '''Run HEC-1''' command in the ''HEC-1'' menu. Before running an HEC-1 simulation, run the model checker which will help identify serious and potential problems that should be corrected before a successful run of HEC-1 can be made.
| | #redirect [[WMS:HEC-1#Run_Analysis]] |
| | |
| The '''Run HEC-1''' command will bring up a dialog which allows specifying three files which are necessary to run HEC-1. The first file is the HEC-1 input file. The second is an ASCII output file generated by HEC-1 and can be used to extract specific results values. It also contains important information which can be used to correct problems encountered when running HEC-1. The third file is a new name for the TAPE22 file, and will contain hydrograph results for basins and outlets. View these results by reading this file with the '''Open''' command from the ''Hydrographs'' menu.
| |
| | |
| Once these files have been defined and selecting '''OK''', HEC-1 will be executed. A separate window will appear and information about the HEC-1 simulation will be reported.
| |
| | |
| If HEC-1 is not executed successively when issuing this command then for PC computers be sure that the path to the HEC1.EXE file is included in AUTOEXEC.BAT.
| |
| | |
| If HEC-1 does not run to a successful completion, view the ASCII output file using the '''View File''' command in the ''File'' menu.
| |
| | |
| | |
| ==Related Topics==
| |
| * [[WMS:HEC-1 Saving Files|Saving HEC-1 Files]]
| |
| * [[WMS:HEC-1 Model Check|Model Check]]
| |
| * [[WMS:HEC-HMS#HEC-1 / HEC-HMS Comparison|HMS]]
| |
| | |
| | |
| {{WMSMain}}
| |
| | |
| [[Category:HEC-1|R]]
| |
