Template:Landuse Raster to Mannings N: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
 
(9 intermediate revisions by 5 users not shown)
Line 1: Line 1:
__NOINDEX__
__NOINDEX__
__NOTOC__
===Landuse Raster to Mannings N===
===Landuse Raster to Mannings N===
This tool converts a landuse raster (NLCD, C-CAP, etc.) to a Mannings N dataset. The tool has the following options:
The ''Landuse Raster to Mannings N'' tool is used to populate the spatial attributes for the Mannin's N roughness coefficient at the sea flow. A new dataset is created from NLCD, C-CAP, or other land use raster.
*''Input landuse raster'' – Select which landuse raster in the project will be the input.
 
*''Landuse raster type'' – Select which type the landuse raster is.
The tool will combine values from the pixels of the raster object specified as a parameter for the tool. For each node in the geometry, the "area of influence" is computed for the node. The area of influence is a square with the node at the center of the square. The size of the square is the average length of the edges connected to the node in the target grid. All of the raster values within the area of influence are extracted from the specified raster object. A composite Manning's N roughness value is computed taking a weighted average of all the pixel values. If a node lies outside of the extents of the specified raster object, the default value is used as the Manning's N roughness value at the node.
 
The tool has the following options:
====Input Parameters====
*''Input landuse raster'' – This is a required input parameter. Specify which raster in the project to use when determining the Manning's N roughness values.
*''Landuse raster type'' – This is a required parameter. Specify what type of landuse raster to use.
**"NLCD" – Sets the landuse raster type to National Land Cover Dataset (NLCD). A mapping table file for NLCD can be found [[Media:Mannings roughness NLCD.csv|here]] and down below.
**"NLCD" – Sets the landuse raster type to National Land Cover Dataset (NLCD). A mapping table file for NLCD can be found [[Media:Mannings roughness NLCD.csv|here]] and down below.
**"C-CAP" – Sets the landuse raster type to Coastal Change Analysis Program (C-CAP). A mapping table file forC-CAP can be found [[Media:Mannings roughness CCAP.csv|here]] and down below.
**"C-CAP" – Sets the landuse raster type to Coastal Change Analysis Program (C-CAP). A mapping table file forC-CAP can be found [[Media:Mannings roughness CCAP.csv|here]] and down below.
**"Other" – Sets the landuse raster type to be set by the user.
**"Other" – Sets the landuse raster type to use a table of values provided by the user.
*''Target grid'' – Select the grid that will be the target.
*''Target grid'' – This is a required input parameter. Specify which grid/mesh the Manning's N roughness dataset will be created for.
*''Landuse to Mannings N mapping table'' The ''Select File...'' button allows a table file to be selected. Its full file name will appear on the box to its right.
*''Landuse to Mannings N mapping table'' The ''Select File...'' button allows a table file to be selected for the "Other" landuse raster type. Its full file name will appear on the box to its right. This must be a CSV file with the following columns of data Code, Description, Manning's N. See the example NLCD and CCAP tables below.
*''Default Mannings N option'' – Select which of the following will be used as the default for Mannings N. The option that is selected will populate an option in the dialog.
*''Default Mannings N option'' – Set the default value to use for the Manning's N roughness values for nodes not lying inside the specified raster object. This can be set to "Constant" to use a constant value or set "Dataset" to select a dataset to use.
**"Constant" – Sets a constant value to be the default for Mannings N.
**"Constant" – Sets a constant value to be the default for Mannings N.
***''Default Mannings N value'' – Sets a constant value to be the default for Mannings N.
***''Default Mannings N value'' – Sets a constant value to be the default for Mannings N.
**"Dataset" – Sets a dataset to be the default for Mannings N.
**"Dataset" – Sets a dataset to be the default for Mannings N.
***''Default Mannings N dataset'' – Select a dataset to be used as the default for Mannings N.
***''Default Mannings N dataset'' – Select a dataset to be used as the default for Mannings N.
*''Subset mask dataset (optional)'' – Select a dataset to be used for the subset mask, which is optional.
*''Subset mask dataset (optional)'' – This optional option allows using a dataset as a subset mask. Nodes not marked as ''active'' in this dataset are assigned the default value.
 
====Output Parameters====
*''Output Mannings N dataset'' – Enter the name for the new Mannings N dataset
*''Output Mannings N dataset'' – Enter the name for the new Mannings N dataset
{{-}}
 
===Mannings Roughness NLCD Mapping Table===
If the landuse type is chosen as NLCD or C-CAP, the default values below are used in the calculation.  If there are different landuse raster types, or wishing to use values that differ from the defaults, specify the raster type as Custom and provide in CSV file with the desired values.
 
====Mannings Roughness NLCD Mapping Table====
{| class="wikitable sortable"
{| class="wikitable sortable"
|+ Mannings Roughness NLCD Values
|+ Mannings Roughness NLCD Values
Line 88: Line 98:
{{-}}
{{-}}


===Quadratic Friction CCAP Mapping Table===
====Mannings Roughness CCAP Mapping Table====
{| class="wikitable sortable"
{| class="wikitable sortable"
|+ Quadratic Friction CCAP Values
|+ Mannings Roughness CCAP Values
! Code !! Description !! Friction
! Code !! Description !! Roughness
<!--Use this template to add a new entry:
<!--Use this template to add a new entry:
|-
|-
| Code        || Description                              || Friction                  
| Code        || Description                              || Roughness                  
-->
-->
|-
|-
| 0          || Background                              || 0.002
| 0          || Background                              || 0.025
|-
|-
| 1          || Unclassified                            || 0.002
| 1          || Unclassified                            || 0.025
|-
|-
| 2          || Developed High Intensity                || 0.1
| 2          || Developed High Intensity                || 0.15
|-
|-
| 3          || Developed Medium Intensity              || 0.046
| 3          || Developed Medium Intensity              || 0.1
|-
|-
| 4          || Developed Low Intensity                  || 0.011
| 4          || Developed Low Intensity                  || 0.05
|-
|-
| 5          || Developed Open Space                    || 0.0018
| 5          || Developed Open Space                    || 0.02
|-
|-
| 6          || Cultivated Crops                        || 0.0062
| 6          || Cultivated Crops                        || 0.037
|-
|-
| 7          || Pasture/Hay                              || 0.005
| 7          || Pasture/Hay                              || 0.033
|-
|-
| 8          || Grassland/Herbaceous                    || 0.0053
| 8          || Grassland/Herbaceous                    || 0.034
|-
|-
| 9          || Deciduous Forest                        || 0.046
| 9          || Deciduous Forest                        || 0.1
|-
|-
| 10          || Evergreen Forest                        || 0.055
| 10          || Evergreen Forest                        || 0.11
|-
|-
| 11          || Mixed Forest                            || 0.046
| 11          || Mixed Forest                            || 0.1
|-
|-
| 12          || Scrub/Shrub                              || 0.011
| 12          || Scrub/Shrub                              || 0.05
|-
|-
| 13          || Palustrine Forested Wetland              || 0.046
| 13          || Palustrine Forested Wetland              || 0.1
|-
|-
| 14          || Palustrine Scrub/Shrub Wetland          || 0.01
| 14          || Palustrine Scrub/Shrub Wetland          || 0.048
|-
|-
| 15          || Palustrine Emergent Wetland (Persistent) || 0.0092
| 15          || Palustrine Emergent Wetland (Persistent) || 0.045
|-
|-
| 16          || Estuarine Forested Wetland              || 0.046
| 16          || Estuarine Forested Wetland              || 0.1
|-
|-
| 17          || Estuarine Scrub/Shrub Wetland            || 0.01
| 17          || Estuarine Scrub/Shrub Wetland            || 0.048
|-
|-
| 18          || Estuarine Emergent Wetland              || 0.0092
| 18          || Estuarine Emergent Wetland              || 0.045
|-
|-
| 19          || Unconsolidated Shore                    || 0.002
| 19          || Unconsolidated Shore                    || 0.03
|-
|-
| 20          || Barren Land                              || 0.037
| 20          || Barren Land                              || 0.09
|-
|-
| 21          || Open Water                              || 0.0018
| 21          || Open Water                              || 0.02
|-
|-
| 22          || Palustrine Aquatic Bed                  || 0.001
| 22          || Palustrine Aquatic Bed                  || 0.015
|-
|-
| 23          || Estuarine Aquatic Bed                    || 0.001
| 23          || Estuarine Aquatic Bed                    || 0.015
|-
|-
| 24          || Perennial Ice/Snow                      || 0.00046
| 24          || Perennial Ice/Snow                      || 0.01
|-
|-
| 25          || Tundra                                  || 0.002
| 25          || Tundra                                  || 0.03
|}
|}
{{-}}
{{-}}
<noinclude>[[Category:Tools]]</noinclude>
<noinclude>[[Category:Toolbox Datasets]]</noinclude>

Latest revision as of 20:09, 26 October 2023


Landuse Raster to Mannings N

The Landuse Raster to Mannings N tool is used to populate the spatial attributes for the Mannin's N roughness coefficient at the sea flow. A new dataset is created from NLCD, C-CAP, or other land use raster.

The tool will combine values from the pixels of the raster object specified as a parameter for the tool. For each node in the geometry, the "area of influence" is computed for the node. The area of influence is a square with the node at the center of the square. The size of the square is the average length of the edges connected to the node in the target grid. All of the raster values within the area of influence are extracted from the specified raster object. A composite Manning's N roughness value is computed taking a weighted average of all the pixel values. If a node lies outside of the extents of the specified raster object, the default value is used as the Manning's N roughness value at the node.

The tool has the following options:

Input Parameters

  • Input landuse raster – This is a required input parameter. Specify which raster in the project to use when determining the Manning's N roughness values.
  • Landuse raster type – This is a required parameter. Specify what type of landuse raster to use.
    • "NLCD" – Sets the landuse raster type to National Land Cover Dataset (NLCD). A mapping table file for NLCD can be found here and down below.
    • "C-CAP" – Sets the landuse raster type to Coastal Change Analysis Program (C-CAP). A mapping table file forC-CAP can be found here and down below.
    • "Other" – Sets the landuse raster type to use a table of values provided by the user.
  • Target grid – This is a required input parameter. Specify which grid/mesh the Manning's N roughness dataset will be created for.
  • Landuse to Mannings N mapping table The Select File... button allows a table file to be selected for the "Other" landuse raster type. Its full file name will appear on the box to its right. This must be a CSV file with the following columns of data Code, Description, Manning's N. See the example NLCD and CCAP tables below.
  • Default Mannings N option – Set the default value to use for the Manning's N roughness values for nodes not lying inside the specified raster object. This can be set to "Constant" to use a constant value or set "Dataset" to select a dataset to use.
    • "Constant" – Sets a constant value to be the default for Mannings N.
      • Default Mannings N value – Sets a constant value to be the default for Mannings N.
    • "Dataset" – Sets a dataset to be the default for Mannings N.
      • Default Mannings N dataset – Select a dataset to be used as the default for Mannings N.
  • Subset mask dataset (optional) – This optional option allows using a dataset as a subset mask. Nodes not marked as active in this dataset are assigned the default value.

Output Parameters

  • Output Mannings N dataset – Enter the name for the new Mannings N dataset

If the landuse type is chosen as NLCD or C-CAP, the default values below are used in the calculation. If there are different landuse raster types, or wishing to use values that differ from the defaults, specify the raster type as Custom and provide in CSV file with the desired values.

Mannings Roughness NLCD Mapping Table

Mannings Roughness NLCD Values
Code Description Mannings
0 Background 0.025
1 Unclassified 0.025
11 Open Water 0.02
12 Perennial Ice/Snow 0.01
21 Developed Open Space 0.02
22 Developed Low Intensity 0.05
23 Developed Medium Intensity 0.1
24 Developed High Intensity 0.15
31 Barren Land (Rock/Sand/Clay) 0.09
41 Deciduous Forest 0.1
42 Evergreen Forest 0.11
43 Mixed Forest 0.1
51 Dwarf Scrub 0.04
52 Shrub/Scrub 0.05
71 Grassland/Herbaceous 0.034
72 Sedge/Herbaceous 0.03
73 Lichens 0.027
74 Moss 0.025
81 Pasture/Hay 0.033
82 Cultivated Crops 0.037
90 Woody Wetlands 0.1
95 Emergent Herbaceous Wetlands 0.045
91 Palustrine Forested Wetland 0.1
92 Palustrine Scrub/Shrub Wetland 0.048
93 Estuarine Forested Wetland 0.1
94 Estuarine Scrub/Shrub Wetland 0.048
96 Palustrine Emergent Wetland (Persistent) 0.045
97 Estuarine Emergent Wetland 0.045
98 Palustrine Aquatic Bed 0.015
99 Estuarine Aquatic Bed 0.015


Mannings Roughness CCAP Mapping Table

Mannings Roughness CCAP Values
Code Description Roughness
0 Background 0.025
1 Unclassified 0.025
2 Developed High Intensity 0.15
3 Developed Medium Intensity 0.1
4 Developed Low Intensity 0.05
5 Developed Open Space 0.02
6 Cultivated Crops 0.037
7 Pasture/Hay 0.033
8 Grassland/Herbaceous 0.034
9 Deciduous Forest 0.1
10 Evergreen Forest 0.11
11 Mixed Forest 0.1
12 Scrub/Shrub 0.05
13 Palustrine Forested Wetland 0.1
14 Palustrine Scrub/Shrub Wetland 0.048
15 Palustrine Emergent Wetland (Persistent) 0.045
16 Estuarine Forested Wetland 0.1
17 Estuarine Scrub/Shrub Wetland 0.048
18 Estuarine Emergent Wetland 0.045
19 Unconsolidated Shore 0.03
20 Barren Land 0.09
21 Open Water 0.02
22 Palustrine Aquatic Bed 0.015
23 Estuarine Aquatic Bed 0.015
24 Perennial Ice/Snow 0.01
25 Tundra 0.03


Retrieved from "https://www.xmswiki.com/index.php?title=Template:Landuse_Raster_to_Mannings_N&oldid=160937"