File:HY8image16.jpg: Difference between revisions
From XMS Wiki
Jump to navigationJump to search
No edit summary |
No edit summary |
||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
[[Category:Energy Dissipators]] | |||
The input variables required for this calculation is the following: | |||
* Baffle Block Height Ratio — The ratio of the baffle block height to baffle block distance from the culvert. | |||
* End Sill Height to Maximum Depth Ratio — ratio to determine the end sill height from the maximum depth. | |||
* Basin Width — The channel width is recommended for the basin width. | |||
The following figures show the design of a Contra Costa basin. | |||
Variables from the figure | |||
* D — Diameter of culvert | |||
* y<sub>0</sub> — Outlet depth | |||
* y<sub>2</sub> — Approximate maximum water surface depth | |||
* y<sub>3</sub> — Basin exit velocity | |||
* V<sub>0</sub> — Outlet velocity | |||
* V<sub>2</sub> — Exit velocity | |||
* h<sub>1</sub> — Height of small baffle | |||
* h<sub>2</sub> — Height of large baffle | |||
* h<sub>3</sub> — Height of end sill | |||
* L<sub>2</sub> — Length from culvert exit to large baffle | |||
* L<sub>3</sub> — Length from large baffle to end sill | |||
* L<sub>B</sub> — Basin length | |||
Latest revision as of 16:46, 4 December 2014
The input variables required for this calculation is the following:
- Baffle Block Height Ratio — The ratio of the baffle block height to baffle block distance from the culvert.
- End Sill Height to Maximum Depth Ratio — ratio to determine the end sill height from the maximum depth.
- Basin Width — The channel width is recommended for the basin width.
The following figures show the design of a Contra Costa basin.
Variables from the figure
- D — Diameter of culvert
- y0 — Outlet depth
- y2 — Approximate maximum water surface depth
- y3 — Basin exit velocity
- V0 — Outlet velocity
- V2 — Exit velocity
- h1 — Height of small baffle
- h2 — Height of large baffle
- h3 — Height of end sill
- L2 — Length from culvert exit to large baffle
- L3 — Length from large baffle to end sill
- LB — Basin length
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | ★ Approved revision 13:07, 7 November 2007 |  | 457 × 504 (28 KB) | Eshaw (talk | contribs) |
You cannot overwrite this file.
File usage
The following page uses this file:
