HY8:Locate Project: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
 
m (Jcreer moved page HY-8:Locate Project to HY8:Locate Project)
 
(12 intermediate revisions by 2 users not shown)
Line 1: Line 1:
==Locate Crossing==
==Locate Crossing==
The first step in building a project is to identify the location of the crossing.  The project contains all of the crossings while the crossings are the locations at which the culverts are placed.  If desired (not required), the map viewer tool  may be used to locate the crossing by entering (latitude,longitude) coordinates or the address of the crossing as shown in the figure below.   
The first step in building a project is to identify the location of the crossing.  The project contains all of the crossings while the crossings are the locations at which the culverts are placed.  If desired (not required), the map viewer [[File:WMSIcon GIS Module.png]] tool  may be used to locate the crossing by entering (latitude,longitude) coordinates or the address of the crossing as shown in the figure below.   


[[Image:HY8image LocateProject.jpg|thumb|none|600 px|''Virtual Earth Map Locator'']]


[[Image:HY8image29.jpg]]


{{hide in print|
{{HY8Main}}
==''Related Topics''==
[[Category:HY-8 General Information|L]]
 
[[Category:Crossing Data|L]]
'''[[WMS:HY-8|HY-8 Main Page]]'''
[[Category:HY-8 Dialogs|Locate]]
 
===Introduction===
* [[WMS:HY-8|Introduction]]
* [[WMS:HY-8 Getting Started|HY-8 Getting Started]]
* [[WMS:HY-8 Differences from DOS HY-8|Differences from DOS HY-8]]
* [[WMS:HY-8 Limitations|Limitations]]
====Building a Project====
:* [[WMS:HY-8 Building a Project|Building a Project]]
:* [[WMS:HY-8 Locate Project|Locate Project]]
:* [[WMS:HY-8 Culvert Crossing Data|Culvert Crossing Data]]
:* [[WMS:HY-8 Run Analysis|Run Analysis]]
:* [[WMS:HY-8 Report Generation|Report Generation]]
}}

Latest revision as of 14:31, 3 October 2016

Locate Crossing

The first step in building a project is to identify the location of the crossing. The project contains all of the crossings while the crossings are the locations at which the culverts are placed. If desired (not required), the map viewer WMSIcon GIS Module.png tool may be used to locate the crossing by entering (latitude,longitude) coordinates or the address of the crossing as shown in the figure below.

Virtual Earth Map Locator


v • e
HY-8
Introduction:Getting Started   •   Layout   •   Vena Contracta   •   Building a Project   •   Locate Project   •   Culvert Crossing Data   •   Run Analysis   •   Report Generation
Crossing and Culvert Data:Crossings   •   Discharge Data   •   Roadway Data   •   Tailwater Data   •   Irregular Channel   •   Culvert Data   •   Site Data   •   Culvert Invert Data   •   Embankment Toe Data
AnalysisProject Units   •   Roadway Overtopping   •   Inlet Control Computations   •   Outlet Control Computations   •   Tables and Plots
Energy DissipationScour Hole Geometry   •   Increased Resistance   •   Tumbling Flow   •   USBR Type IX Baffled Apron   •   Drop Structures   •   Stilling Basins   •   Streambed Level Structures
MethodsAquatic Organism Passage   •   Low Flow Hydraulics
TroubleshootingDifferences from DOS HY-8   •   Limitations   •   HY-8 User Manual
Retrieved from "https://www.xmswiki.com/index.php?title=HY8:Locate_Project&oldid=112850"