|
|
| Line 1: |
Line 1: |
| {{FEMWATER Links}}
| | #REDIRECT [[GMS:Building a FEMWATER Model]] |
| ===The Direct Approach===
| |
| | |
| For models with simple geometry and boundary conditions, the entire model can be constructed using the tools and commands in the 3D Mesh module. With this approach, the editing of the FEMWATER data is performed directly on the nodes and elements of the mesh. The first step is to create a 3D mesh covering the model domain using the mesh building tools in the 3D Mesh module. The boundary conditions and source/sink terms are then assigned by [[GMS:3D Mesh Tool Palette|selecting nodes]], [[GMS:3D Mesh Tool Palette|elements]], and [[GMS:3D Mesh Tool Palette|element faces]] and assigning values directly to the selected objects. The model is then saved and FEMWATER is launched.
| |
| | |
| :'''Creating a Mesh'''
| |
| :The first step in performing a FEMWATER simulation is to create a 3D finite element mesh. The volumetric domain to be modeled by FEMWATER is idealized and discretized into hexahedra, prisms, tetrahedra, and or pyramids. Elements are grouped into zones representing hydrostratigraphic units. Each element is assigned a material ID representing the zone to which the element belongs. When constructing a mesh, care should be taken to ensure that elements do not cross or straddle hydrostratigraphic boundaries.
| |
| | |
| :The tools provided in GMS for constructing a 3D finite element mesh are provided in the 3D Mesh Module. When constructing a mesh for FEMWATER, there are a few important guidelines that should be considered. These guidelines are described in Chapter 3 of the FEMWATER Reference Manual.
| |
| | |
| :The most efficient method for constructing a 3D mesh for FEMWATER is to use the conceptual model approach. The FEMWATER conceptual model can be used to automatically build a 2D mesh that matches the model boundaries and is refined around wells. This mesh can then be [[GMS:Building the 3D Mesh from the FEMWATER Conceptual Model|extruded into a 3D mesh]].
| |
| | |
| :Solids can also be used to make a structured mesh. This is accomplished with the [[GMS:Solids to Layered Mesh|Solids -> Layered Mesh]] command in the '''Solids''' menu.
| |
| | |
| | |
| {{Navbox GMS}}
| |
| | |
| [[Category:FEMWATER]]
| |
