User:Jcreer/TUFLOW FV Dialogs: Difference between revisions
From XMS Wiki
Jump to navigationJump to search
(→Output) |
|||
| Line 4: | Line 4: | ||
*Activate parameter group | *Activate parameter group | ||
===General=== | ===General=== | ||
*Bottom Drag Model | *Bottom Drag Model – The default friction approach. Manning’s number will be used as the bottom drag model. | ||
*CFL – Default limit is 1. | *CFL – Default limit is 1. | ||
*Initial Water Level – The initial condition above the bed at the downstream end. | *Initial Water Level – The initial condition above the bed at the downstream end. | ||
Revision as of 18:14, 9 March 2016
Dialogs in TUFLOW FV have been built using the generic model interface.
TUFLOW FV Global Parameters
- Activate parameter group
General
- Bottom Drag Model – The default friction approach. Manning’s number will be used as the bottom drag model.
- CFL – Default limit is 1.
- Initial Water Level – The initial condition above the bed at the downstream end.
Time
- Time Format – Default is set to hours.
- Start Time – Initial time for first time step. Default is set to 0.0.
- End Time – Time of last time step.
Output
- Output Dir – Specify directory to create the output files.
- SMS Dat Output – Specifies the output file as an SMS data file or as a DATV file.
- Dat Output Types – Options are h, v, and d. Use h to output files with water level data. Use v to output velocity data. Use d to output water depth data.
- Dat Output Interval
- Flux Output
- Flux Output Interval
HD Parameters
- horizontal eddy viscosity calculation
- Global horizontal eddy viscosity
Advanced Parameters
- Command 1
- Command 2
TUFLOW FV Material Properties
The TUFLOW FV Material Properties dialog allows setting the roughness for materials defined in the general Materials Data dialog.
TUFLOW FV Nodestring Boundary Conditions
- Flow
- Water Level
