|
|
| Line 1: |
Line 1: |
| {{TOCright}}
| | #redirect [[SMS:Bugfixes SMS]] |
| See [[SMS:Downloads|Downloads]] or visit the [http://www.aquaveo.com/downloads Aquaveo download page] to obtain the latest version of SMS.
| |
| | |
| == Intermediate release SMS 10.0.11 - February 10, 2009 ==
| |
| * Fixed a merge meshes crash
| |
| * Fixed a problem with RMA2 Marsh Porosity where all of the data was not being saved
| |
| * Fixed a problem with ADCIRC weirs
| |
| * Fixed a problem with zonal classification
| |
| * Fixed a crash in converting GIS shapefiles to feature objects
| |
| * Fixed a problem where RMA2 steering it always reports 0.0% of target
| |
| | |
| == Intermediate release SMS 10.0.10 - December 10, 2008 ==
| |
| * Fixed a crash with converting Shapefiles (GIS) to Feature objects (Map module)
| |
| * Fixed a problem where Shapefile->Map created additional arcs
| |
| * Material Assignments to elements mixed up
| |
| * Fixed a problem with initial values not initializing correctly in the vector to scalar dialog
| |
| * Fixed a crash when opening sms or fpr file
| |
| * Fixed a problem where renaming an arc incorrectly closed a profile plot
| |
| * Fixed a problem where image pyramids were sometimes not setup correctly for large images
| |
| * Fixed a problem where SMS sometimes hung when doing a delete all command
| |
| * Fixed a problem where ADCIRC spatial attributes were not being seeded correctly from the specified dataset
| |
| * Fixed a problem where ADCIRC spatial attributes were not using the default values which caused larger files to be written then were necessary
| |
| * Fixed a problem where reading a partially complete ADCIRC solution was completely aborted rather than reading valid timesteps
| |
| | |
| == Intermediate release SMS 10.0.9 - November 4, 2008 ==
| |
| *Fixed a crash with the material properties for generic model interface
| |
| *Fixed a problem with contour labels showing incorrect values
| |
| *Fixed a problem with the controls to adjust the size of the contour legend
| |
| *Fixed a crash with cleaning really complicated map coverages
| |
| *Fixed a crash with opening project files with plots that have incomplete data
| |
| *Fixed a crash with zonal classification feature
| |
| *Fixed a crash that occurred when moving SMS between monitors when using multiple displays
| |
| *Fixed a crash with the FESWMS global bed control
| |
| *Fixed a problem with demo mode that prevented the user from panning or zooming correctly
| |
| *Fixed a problem with using the virtual earth locator to download teraserver images
| |
| | |
| == Intermediate release SMS 10.0.8 - October 6, 2008 ==
| |
| * Fixed a problem with merging cartesian grid rows and columns
| |
| * Fixed a problem where generating cellstrings along boundary produced overlapping strings
| |
| | |
| == Intermediate release SMS 10.0.7 - August 29, 2008 ==
| |
| * SMS now correctly writes the viscosity data to the appropriate input files
| |
| * Fixed a problem with RMA4 nodestrings with midside nodes
| |
| * Changed find by node ID so that the red circle stays around longer
| |
| * Fixed a crash relating to flux plots
| |
| * Fixed a crash that occured when reading certain project files
| |
| * Fixed a crash relating to boundary conditions with the Generic 2D Mesh Model
| |
| * Fixed a crash that occured when running FESWMS
| |
| * Fixed a problem with an improper wave angle written out when steering with CMS-Wave
| |
| * Fixed a problem with specify input paths for PTM hydrodynamics
| |
| * Fixed a crash when selecting a cell in a grid with no elevation dataset
| |
| * Fixed a problem where the BOUSS2D Wave generator arrow was displayed in the wrong direction
| |
| * Fixed a crash that occured when reading an ADCIRC fort.61 file
| |
| * Fixed a crash that occured when observation coverages were deleted before their associated plots
| |
| * Fixed a problem with converting Cartesian Grid coordinates
| |
| * Fixed so the selection highlighting is done correctly when using the Cartesian Grid Find Cell command.
| |
| * Fixed a crash after deleting materials from the CGWave materials dialog
| |
| * Updated the PTM executable so it will work with hardware locks
| |
| * Fixed a crash when using nested STWAVE grids
| |
| * Fixed a crash that occured when you tried to read in scattered data when the scatter module is not enabled
| |
| * Fixed a crash when reading incomplete FESWMS .sed files
| |
| * Changed SMS to not report PTM warnings for "Mapping Output Interval" if mapping output is turned off
| |
| * You will no longer be prompted to save twice when working with STWAVE
| |
| * SMS now treats ADCIRC fort.73 and fort.74 files correctly in the model control tab
| |
| * Fixed a crash with some RMA4 project files
| |
| * Fixed problems with exporting multiple timesteps into a tabular data file
| |
| * Fixed a problem with functional surfaces not displaying correctly after changing the display options.
| |
| * Fixed an endless loop when trying to create "multiple view" filmloops
| |
| | |
| == Intermediate release SMS 10.0.6 - July 15, 2008 ==
| |
| * A problem with the display getting fouled up after changing the z-mag until the next frame command has been fixed
| |
| * Fixed crash when trying to assign ADCIRC weirs to nodestrings with different numbers of nodes
| |
| * SMS now correctly uses external files specified in the TUFLOW grid options dialog
| |
| * Fixed a problem where invalid material references could be created when using the generic model interface
| |
| * Fixed a crash that happened on certain computers when saving scatter sets as TINs
| |
| * Fixed a problem with the tutorial files for the generic model interface
| |
| * Fixed a crash with multiple view filmloops
| |
| * Inverting cell selection with Cartesian Grids now works correctly
| |
| * Select Cartesian Grid cells by data value has been fixed
| |
| * The node ordering for boundaries and forcing files has been made consistent
| |
| * STWAVE now runs multiple events from SMS
| |
| * The display will now update correctly after changing a nodes x, y coordinates
| |
| * Fixed a crash with observation fluxes
| |
| * Fixed a problem with observation attribute names for arcs when using both nodes and arcs
| |
| * Scatter edges now display correctly when panning after swapping edges
| |
| * The display now updates correctly after reversing the direction of a feature arc
| |
| * Fixed a crash with zonal classification if you enter the dialog with zones defined that don’t have any criteria
| |
| * Fixed Ctrl+ key shortcuts to match the descriptions in the menu
| |
| * When mapping an elevation dataset the correct name is now used
| |
| * Fixed a problem saving TUFLOW event data
| |
| * Select by material type now refreshes appropriately
| |
| * Fixed select by dataset value for nodes
| |
| * Fixed a crash with certain FESWMS sed files
| |
| * Fixed a crash that occurred sometimes when loading a DEM from an asc file
| |
| * Fixed a crash that occurred with Cartesian Grid functional surfaces and ATI graphics cards
| |
| * Modified the Scatter Contour -> Feature dialog to work more cleanly
| |
| * Fixed a crash that occurred with reading some ADCIRC datasets
| |
| * Fixed creating cell strings for PTM from CMS-Flow
| |
| | |
| == Intermediate release SMS 10.0.5 - June 20, 2008 ==
| |
| * Fixed a problem with SMS accessing deleted temporary files.
| |
| * Fixed a crash with trying to access plot data after deleting feature arcs.
| |
| * Bouss-2D wave maker images now appear right side up.
| |
| * Fixed a crash with deleting nodes with nodal boundary conditions being displayed.
| |
| * Fixed a problem with creating PTM input data from an RMA2 solution.
| |
| * Fixed a crash that sometimes occured when smoothing size datasets in the mesh module.
| |
| * Fixed a problem with reading RMA2 mesh and solution files that have gaps in the node ids.
| |
| * Fixed a crash that occured when deleting improperly created Cartesian grid cell strings.
| |
| * Fixed a crash with exporting tabular data.
| |
| * We now give an explanation message if we cannot create a nautical grid.
| |
| * Fixed a problem where sometimes multiple scalar and vector datasets could appear active.
| |
| * SMS now updates the time window when datasets are referenced to a specific timeframe.
| |
| * Fixed a problem where SMS doesn't terminate on exit if a solution dataset has no valid values.
| |
| * Coordinate transforms are now applied to all the grids and not just the active grid.
| |
| * Fixed a meshing crash that sometimes happened with scalar density paving.
| |
| * SMS now writes the TUFLOW initial water level value in the tgc file so it can be overriden by water level polygons.
| |
| * SMS now writes the STWAVE nesting cells correctly.
| |
| * Fixed a problem where it was necessary to launch STWAVE twice before it would run successfully.
| |
| * Fixed a problem with Bouss2D probe dialog.
| |
| * SMS now saves the Cartesian Grid arc options.
| |
| * Changed the output format of the CMS Wave energy file to ensure proper spacing between numbers.
| |
| * The Refine point dialog now uses I and J rather than U and V to be consistent with other parts of the interface.
| |
| * SMS now handles the TUFLOW external grid file correctly.
| |
| * Trying to assign weirs to nodestrings of different numbers of nodes no longer crashes.
| |
| * Fixed a problem with changing the z-magnification that broke the display until the next frame occured.
| |
| | |
| ==Intermediate release SMS 10.0.4 - June 11, 2008==
| |
| * Mesh contours will now display correctly when there are timesteps that are completely dry
| |
| * Fixed a CMS-Flow, CMS-Wave steering crash
| |
| * Fixed a crash that occured when creating arrowheads using the map draw tools
| |
| * Fixed GIS to Coverage when using a TUFLOW network coverage
| |
| * The profile plot now updates when adding and removing arcs from arc groups
| |
| * Map nodes were drawn in their old location after being dragged to a new location
| |
| * Arcs would sometimes disappear behind transparent contours
| |
| * The origin of observation arcs now save with map files
| |
| * Default stamp elevation for feature stamping is now used correctly
| |
| * Newly created coverages are now active in the project explorer
| |
| * Transparency for Cartesian Grid functional surfaces has been fixed
| |
| * Color filled and linear contours now appear at the same z elevation for Cartesian Grids
| |
| * Naming observation arcs no longer cause a crash
| |
| * Fixed a nodestring display update issue
| |
| * Fixed a crash reading shape files
| |
| * PTM post processing datasets are now saved with the project
| |
| * Triple clicking the same point when creating an arc no longer causes a crash
| |
| * Having multiple CMS Flow grids with cellstrings no longer causes bad cellstrings
| |
| * Trying to save a scatter set to a read only file no longer crashes SMS
| |
| * SMS again allows users to drag files onto the icon to open them
| |
| * An issue with the timestep window not showing up when using PTM has been fixed
| |
| * Fixed a crash when deleting points used by an observation plot
| |
| * There were times when newly created scatter points were not added to the triangulation. This has been fixed.
| |
| * At times SMS would hang when optimizing the triangulation
| |
| * Contour labels are no longer cut off by color filled contours
| |
| * Fixed a selection problem with scatter vertices by when using a polygon
| |
| * Some DEM files were not reading in correctly but they do now
| |
| * TUFLOW 1D Flow vs WSE boundary conditions were not be written to the TUFLOW files correctly
| |
| * The get info dialog for meshes no longer reports information from unused models
| |
| * Fixed the DEM import dialog so that the feedback is correct and makes sense
| |
| * Fixed a problem with display updates when assigning flowrate boundary conditions
| |
| * Functional surfaces now frame correctly
| |
| * The screen refreshes correctly when interpolating between nodes
| |
| * It is now always possible to exit selecting with a box by using the escape key
| |
| * Fixed a crash that occurred when copy a coverage with selected entities
| |
| * Removed excess information from the zonal classification logs
| |
| * Fixed a crash when reading an invalid RMA2 solution
| |
| * SMS now stores Bouss2D grids the right size and with the correct indices
| |
| * Fixed some problems with Bouss2D probes
| |
| * SMS now displays coverages in the correct order
| |
| * Fixed a problem where multiple CGrids sometimes displayed
| |
| * Fixed 1D element contours
| |
| * Fixed problems with grid frames (dragging, deleting, and copying)
| |
| * Fixed a problem with 1D element node updates
| |
| * Coastline files can be created even if you don't have CGWave enabled
| |
| * Fixed a crash with deleting cell strings
| |
| | |
| ==Intermediate release SMS 10.0.3 - May 1, 2008 ==
| |
| * PTM executable updated to version 2.025
| |
| * Saving out coastline file available if CGWAVE or ADCIRC is enabled
| |
| * ADCIRC 63/64 file crash
| |
| * Slow deletion of feature points
| |
| * STWAVE coverage issue specifying land polygons
| |
| * GIS to Feature data crash
| |
| * Generic model interface - global parameter definition bug
| |
| * Import wizard problem where z elevations not properly mapped to feature points
| |
| * Fixed multiple views film-loop
| |
| * GIS to Map for TUFLOW network coverage fixed
| |
| * Relocated map node displayed at old location until refresh
| |
| * Origin of observation arc is now saved in the map file
| |
| * Cartesian grid Color fill and linear contours are now displayed at consistent elevations to improve visualizing them in 3D
| |
| * Name observation arc crash
| |
| * Nodestring display issue
| |
| * Fixed create arc tool crash
| |
| * Editing scatter points and overwriting HDF5 file problem
| |
| * Crash when deleting feature points in specific situations
| |
| | |
| ==Intermediate release SMS 10.0.2 - March 14, 2008==
| |
| *Crash when performing change/delete when triangles selected
| |
| *Print preview not functioning
| |
| *Scale legend does print correctly
| |
| *Text and drawing objects not printing correctly
| |
| *Transform feature objects was not working for PTM coverages
| |
| *STWAVE Boundary conditions types not saved correctly
| |
| | |
| ==Intermediate release SMS 10.0.1 - February 19, 2008==
| |
| *Fixed the inability to select Southern hemisphere UTM zones
| |
| *Fixed several graphical glitches including texture mapping on a surface and several update problems
| |
| *Fixed various problems with the spectral energy dialog
| |
| *Removed misleading messages that originate from the generic model interface
| |
| *Fixed a crash that sometimes occurred when using zonal classification
| |
| *Fixed a problem with PTM traps that was reporting the open/closed state incorrectly
| |
| *Fixed some issues with models that only support metric units
| |
| *Fixed a crash that sometimes occurred when trying to use LTEA
| |
| *Changed STWAVE to write out all datasets by default
| |
| *Fixed coordinate conversions for PTM sources
| |
| *Fixed a bug that sometimes caused poor meshes to be generated
| |
| | |
| == Related Topics ==
| |
| * [[SMS:Bugfixes_SMS|SMS Intermediate Release Bugfixes]]
| |
| * [[SMS:Downloads|Downloads]]
| |
| * [[SMS:What's New in SMS|What's New in SMS]]
| |
| * [[SMS:Introduction to Setting up SMS|Installing and Setting up SMS]]
| |
| * [[System Requirements|System Requirements]]
| |
| * [[License Agreement|License Agreement]]
| |
| | |
| | |
| {{Template:Navbox SMS}}
| |
