HY8:Drop Structures: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
m (Jcreer moved page HY-8:Drop Structures to HY8:Drop Structures)

Revision as of 14:44, 10 October 2016

Drop structures are commonly used for flow control and energy dissipation. Their main purpose is to change the slope from steep to mild by placing drop structures at intervals along the channel reach. Two types of Drop Structure External Dissipators are available:


v • e
HY-8
Introduction:Getting Started   •   Layout   •   Vena Contracta   •   Building a Project   •   Locate Project   •   Culvert Crossing Data   •   Run Analysis   •   Report Generation
Crossing and Culvert Data:Crossings   •   Discharge Data   •   Roadway Data   •   Tailwater Data   •   Irregular Channel   •   Culvert Data   •   Site Data   •   Culvert Invert Data   •   Embankment Toe Data
AnalysisProject Units   •   Roadway Overtopping   •   Inlet Control Computations   •   Outlet Control Computations   •   Tables and Plots
Energy DissipationScour Hole Geometry   •   Increased Resistance   •   Tumbling Flow   •   USBR Type IX Baffled Apron   •   Drop Structures   •   Stilling Basins   •   Streambed Level Structures
MethodsAquatic Organism Passage   •   Low Flow Hydraulics
TroubleshootingDifferences from DOS HY-8   •   Limitations   •   HY-8 User Manual
Retrieved from "https://www.xmswiki.com/index.php?title=HY8:Drop_Structures&oldid=113314"