User:Jcreer/TUFLOW FV Dialogs: Difference between revisions
From XMS Wiki
Jump to navigationJump to search
(→Time) |
(→Output) |
||
| Line 16: | Line 16: | ||
*Output Dir | *Output Dir | ||
*SMS Dat Output | *SMS Dat Output | ||
*Dat Output Types | *Dat Output Types – Options are h, v, and d. Use h to output files with water level data. Use v to output velocity data. Use d to output water depth data. | ||
*Dat Output Interval | *Dat Output Interval | ||
*Flux Output | *Flux Output | ||
*Flux Output Interval | *Flux Output Interval | ||
===HD Parameters=== | ===HD Parameters=== | ||
*horizontal eddy viscosity calculation | *horizontal eddy viscosity calculation | ||
Revision as of 18:11, 9 March 2016
Dialogs in TUFLOW FV have been built using the generic model interface.
TUFLOW FV Global Parameters
- Activate parameter group
General
- Bottom Drag Model
- CFL – Default limit is 1.
- Initial Water Level – The initial condition above the bed at the downstream end.
Time
- Time Format – Default is set to hours.
- Start Time – Initial time for first time step. Default is set to 0.0.
- End Time – Time of last time step.
Output
- Output Dir
- SMS Dat Output
- Dat Output Types – Options are h, v, and d. Use h to output files with water level data. Use v to output velocity data. Use d to output water depth data.
- Dat Output Interval
- Flux Output
- Flux Output Interval
HD Parameters
- horizontal eddy viscosity calculation
- Global horizontal eddy viscosity
Advanced Parameters
- Command 1
- Command 2
TUFLOW FV Material Properties
The TUFLOW FV Material Properties dialog allows setting the roughness for materials defined in the general Materials Data dialog.
TUFLOW FV Nodestring Boundary Conditions
- Flow
- Water Level
