HY8:Culvert Data: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
m (Jcreer moved page HY-8:Culvert Data to HY8:Culvert Data)
(No difference)

Revision as of 14:45, 4 October 2016

Culvert data are entered by selecting the Culvert Crossing Data option from the Culvert menu, or by right-clicking on the culvert in the Project Explorer window and selecting Input Properties. The following culvert data are required:


HY8image22.jpg


The site data for each culvert are also entered in the culvert data portion of the Culvert Properties window. There is the option of entering culvert invert data or embankment toe data.


v • e
HY-8
Introduction:Getting Started   •   Layout   •   Vena Contracta   •   Building a Project   •   Locate Project   •   Culvert Crossing Data   •   Run Analysis   •   Report Generation
Crossing and Culvert Data:Crossings   •   Discharge Data   •   Roadway Data   •   Tailwater Data   •   Irregular Channel   •   Culvert Data   •   Site Data   •   Culvert Invert Data   •   Embankment Toe Data
AnalysisProject Units   •   Roadway Overtopping   •   Inlet Control Computations   •   Outlet Control Computations   •   Tables and Plots
Energy DissipationScour Hole Geometry   •   Increased Resistance   •   Tumbling Flow   •   USBR Type IX Baffled Apron   •   Drop Structures   •   Stilling Basins   •   Streambed Level Structures
MethodsAquatic Organism Passage   •   Low Flow Hydraulics
TroubleshootingDifferences from DOS HY-8   •   Limitations   •   HY-8 User Manual
Retrieved from "https://www.xmswiki.com/index.php?title=HY8:Culvert_Data&oldid=112978"