HY8:Run Analysis: Difference between revisions
m (Jcreer moved page HY-8:Run Analysis to HY8:Run Analysis) |
|||
| Line 1: | Line 1: | ||
==Run Analysis== | ==Run Analysis== | ||
After defining the culvert and crossing data the culvert hydraulics are analyzed, including balancing flow through multiple culverts and [[ | After defining the culvert and crossing data the culvert hydraulics are analyzed, including balancing flow through multiple culverts and [[HY8:Roadway Overtopping|over the roadway.]] Viewing the analysis of a crossing can be done by right-clicking on the desired crossing in the Project Explorer window and selecting '''Analyze Crossing''' as seen in the figure below. The ''Analyze Crossing'' feature can also be accessed for the currently selected crossing from the ''Culvert Crossing Data Window'', the ''Culvert'' menu, or from the culvert toolbar [[File:RunAnalysisIcon.png]]. | ||
During the analysis the program completes the necessary hydraulic computations after which the overtopping performance table will be displayed. A [[HY-8:Crossing Summary|summary of flows]] at the crossing will be displayed, including any overtopping flows if they occur. While viewing the analysis, it also possible to view individual [[HY-8:Culvert Summary|culvert summary tables]], [[HY-8:Water Surface Profiles|water surface profiles]], the [[HY-8:Tapered Inlet|tapered inlet table]], as well as a [[HY-8:Customized|customized table]] made up of any of the parameters computed during the analysis. | During the analysis the program completes the necessary hydraulic computations after which the overtopping performance table will be displayed. A [[HY-8:Crossing Summary|summary of flows]] at the crossing will be displayed, including any overtopping flows if they occur. While viewing the analysis, it also possible to view individual [[HY-8:Culvert Summary|culvert summary tables]], [[HY-8:Water Surface Profiles|water surface profiles]], the [[HY-8:Tapered Inlet|tapered inlet table]], as well as a [[HY-8:Customized|customized table]] made up of any of the parameters computed during the analysis. | ||
Revision as of 20:54, 6 October 2016
Run Analysis
After defining the culvert and crossing data the culvert hydraulics are analyzed, including balancing flow through multiple culverts and over the roadway. Viewing the analysis of a crossing can be done by right-clicking on the desired crossing in the Project Explorer window and selecting Analyze Crossing as seen in the figure below. The Analyze Crossing feature can also be accessed for the currently selected crossing from the Culvert Crossing Data Window, the Culvert menu, or from the culvert toolbar 
.
During the analysis the program completes the necessary hydraulic computations after which the overtopping performance table will be displayed. A summary of flows at the crossing will be displayed, including any overtopping flows if they occur. While viewing the analysis, it also possible to view individual culvert summary tables, water surface profiles, the tapered inlet table, as well as a customized table made up of any of the parameters computed during the analysis.
