Template:Arcs from UGrid Points: Difference between revisions
From XMS Wiki
Jump to navigationJump to search
(Created page with "__NOINDEX__ __NOTOC__ ===Arcs from UGrid Points=== The ''Arcs from UGrid Points'' tool can be used to find clusters of points on a UGrid that are close to each other and convert these clusters to arcs. For example, one use case might be to take a set of cross section survey points and convert these points to cross section lines as shown in the images below: :thumb|none|500 px| UGrid points representing a cross section survey. :Image:roundup2.p...") |
No edit summary |
||
| Line 6: | Line 6: | ||
For example, one use case might be to take a set of cross section survey points and convert these points to cross section lines as shown in the images below: | For example, one use case might be to take a set of cross section survey points and convert these points to cross section lines as shown in the images below: | ||
:[[Image:roundup1.png|thumb|none|500 px| UGrid points | :[[Image:roundup1.png|thumb|none|500 px| UGrid points from a cross section survey.]] | ||
:[[Image:roundup2.png|thumb|none|500 px| Arcs generated from the UGrid survey points using the Arcs from UGrid Points tool.]] | :[[Image:roundup2.png|thumb|none|500 px| Arcs generated from the UGrid survey points using the Arcs from UGrid Points tool.]] | ||
Revision as of 23:14, 14 May 2024
Arcs from UGrid Points
The Arcs from UGrid Points tool can be used to find clusters of points on a UGrid that are close to each other and convert these clusters to arcs.
For example, one use case might be to take a set of cross section survey points and convert these points to cross section lines as shown in the images below:
Input Parameters
- Input grid – The input UGrid or mesh to process.
- Number of nearest neighbors – The number of nearest neighboring points to check.
- Connect isolated points – Whether to connect isolated points.
- Enforce max distance – Whether to enforce the maximum distance between points.
- Max distance – The maximum distance between points.
Output Parameters
- Output coverage name – The name of the output coverage.
Current Location in toolbox
Coverages/Arcs from UGrid Points
