Template:Refine 2D Mesh by Error: Difference between revisions
From XMS Wiki
Jump to navigationJump to search
(Created page with "__NOINDEX__ __NOTOC__ ===Refine 2D Mesh by Error=== <!--====Tool description====--> The ''Refine 2D Mesh by Error'' tool creates a 2D mesh that has been refined based on an existing 2D mesh and one or more elevation rasters. ====Input parameters==== *''Mesh'' – Select the 2D mesh that will be refined. *''Error threshold'' – Enter a value to guide the acceptable threshold for error for the mesh refinement. *''Maximum iterations'' – The tool will perfor...") |
m (Protected "Template:Refine 2D Mesh by Error" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite))) |
(No difference)
| |
Latest revision as of 22:56, 28 May 2024
Refine 2D Mesh by Error
The Refine 2D Mesh by Error tool creates a 2D mesh that has been refined based on an existing 2D mesh and one or more elevation rasters.
Input parameters
- Mesh – Select the 2D mesh that will be refined.
- Error threshold – Enter a value to guide the acceptable threshold for error for the mesh refinement.
- Maximum iterations – The tool will perform multiple iterations when refining the new mesh. Enter the maximum number of iterations to perform. The tool will stop performing iterations once it has reached the maximum limit if it has not completed refinement before this value is reached.
- Raster 1 (highest priority) – The elevation raster that will be used for refinement. This raster will be given priority over any additional rasters being used.
- Raster n – Allows selecting an additional raster to use in refinement.
Output parameters
- Output mesh name – Enter the name for the new refined mesh.
Current Location in toolbox
2D Mesh/Refine 2D Mesh by Error
