Template:GMS Edit Cross Sections Workflow

From XMS Wiki
Revision as of 16:17, 18 January 2017 by Jcreer (talk | contribs)

Jump to navigationJump to search
1. Snap cross sections to a surface.
Boreholes cross sections can be adjusted to match a TIN if a TIN has been imported into the project.
  1. Select the Boreholes | Advanced | Snap Cross Sections to TIN menu command.
  2. Use the Snap Cross Sections to TIN dialog.
2. Auto-fill cross sections.
  1. Select the Boreholes| Auto-Fill Blank Cross Sections menu command.
  2. Use the options in the Auto-Fill Cross Sections dialog.
3. Manually fill cross sections.
  1. Using the Select Cross Section tool, select one or more cross sections.
  2. Select the Boreholes | 'Cross Section Editor menu command.
  3. Use the Cross Section Editor dialog.
Retrieved from "https://www.xmswiki.com/index.php?title=Template:GMS_Edit_Cross_Sections_Workflow&oldid=118235"