User:Jcreer/SMS:SRH-2D Changes

From XMS Wiki
< User:Jcreer
Revision as of 21:24, 2 October 2024 by Jcreer (talk | contribs)
Jump to navigationJump to search

At release apply updates here: SMS:Simulations#Monitoring_Data

Monitoring Data

The Simulation Run Queue contains an option for Monitoring Data. Turning on this option activates the tabs underneath for the selected simulation. The tabs are:

  • Command Line – Shows the command line entries for the selected process. Reports errors encountered during the simulation run.
  • Residual Plot – Shows the residual plot for the selected simulation.
  • Monitor Point Plot – If monitor points are included in the simulation, this shows a plot for the point location once the simulation has included the point in the simulation run.
  • Monitor Line Plot – If monitor lines are included in the simulation, this shows a plot for the line location once the simulation has included the line in the simulation run.
Retrieved from "https://www.xmswiki.com/index.php?title=User:Jcreer/SMS:SRH-2D_Changes&oldid=163737"