User:Jcreer/MDOFLOW 6 New Packages

MF6 BUY Package

The Buoyancy (BUY) Package dialog

The Buoyancy (BUY) Package dialog is accessed by double-clicking on the BUY package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options:

• Sections list – A list of sections that can be turned on or off:
  • Comments – Turn on to make the Comments section visible.
  • Options – Turn on to make the Options section visible.
  • PACKAGEDATA – Turn on to make the PACAKGEDATA section visible. This section is on by default.
• Comments section – Enter general alphanumeric comments. Comments entered here get written at the top of the file, preceded by a '#' symbol.
• Options section – Temporal options and settings:
  • HHFORMULATION_RHS
  • DENSEREF
  • DENSITY FILEOUT
• PACKAGEDATA section – Contains the following:
  • Add Rows
  • IRHOSPEC
  • DRHODC
  • CRHOREF
  • MODELNAME
  • AUXSPECIESNAME

MF6 CSUB Package

The Skeletal Storage, Compaction, and Subsidence (CSUB) Package dialog

The Skeletal Storage, Compaction, and Subsidence (CSUB) Package dialog is accessed by double-clicking on the CSUB package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options:

• Sections list – A list of sections that can be turned on or off:
  • COMMENTS – Turn on to make the COMMENTS section visible.
  • OPTIONS – Turn on to make the OPTIONS section visible.
  • GRIDDATA – Turn on to make the GRIDDATA section visible.
  • DATA – Turn on to make the DATA section visible. This section is on by default.
• COMMENTS section – Enter general alphanumeric comments. Comments entered here get written at the top of the file, preceded by a '#' symbol.
• OPTIONS section – Options and settings:
  • BOUNDNAMES
  • PRINT_INPUT
  • SAVE_FLOWS
  • GAMMAW
  • BETA
  • HEAD_BASED
  • INITIAL_PRECONSOLIDATION_HEAD
  • NDELAYCELLS
  • COMPRESSION_INDICES
  • UPDATE_MATERIAL_PROPERTIES
  • CELL_FRACTION
  • SPECIFIED_INITIAL_INTERBED_STATE
  • SPECIFIED_INITIAL_PRECONSOLIDATION_STRESS
  • SPECIFIED_INITIAL_DELAY_HEAD
  • EFFECTIVE_STRESS_LAG
  • STRAIN_CSV_INTERBED
  • STRAIN_CSV_COARSE
  • COMPACTION
  • COMPACTION_ELASTIC
  • COMPACTION_INELASTIC
  • COMPACTION_COARSE
  • ZDISPLACEMENT
  • PACKAGE_CONVERGENCE
  • TS6 FILEIN
  • OBS6 FILEIN
• GRIDDATA section – Contains the following:
  • Dataset to Array...
  • CG_SKE_CR
  • CG_THETA
  • SGM
  • SGS
• DATA section – Contains the following:
  • PACKAGEDATA
  • PERIODS

MF6 ADV Package

The Advection (ADV) Package dialog

The Advection (ADV) Package dialog is accessed by double-clicking on the ADV package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options:

• Sections list – A list of sections that can be turned on or off:
  • COMMENTS – Turn on to make the COMMENTS section visible.
  • OPTIONS – Turn on to make the OPTIONS section visible.
• COMMENTS section – Enter general alphanumeric comments. Comments entered here get written at the top of the file, preceded by a '#' symbol.
• OPTIONS section – Options and settings:
  • SCHEME

MF6 CNC Package

The Constant Concentration (CNC) Package dialog

The Constant Concentration (CNC) Package dialog is accessed by double-clicking on the CNC package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options:

• Sections list – A list of sections that can be turned on or off:
  • COMMENTS – Turn on to make the COMMENTS section visible.
  • OPTIONS – Turn on to make the OPTIONS section visible.
  • PERIODS – Turn on to make the PERIODS section visible.
• COMMENTS section – Enter general alphanumeric comments. Comments entered here get written at the top of the file, preceded by a '#' symbol.
• OPTIONS section – Options and settings:
  • AUXILIARY
  • AUXMULTNAME
  • BOUNDNAMES
  • PRINT_INPUT
  • PRINT_FLOWS
  • SAVE_FLOWS
  • TS6 FILEIN
  • OBS6 FILEIN
• PERIODS section – ...
  • Period
  • Define Period
  • Delete Period
  • Add Rows
  • Delete Rows
  • Plot All Periods
  • Open Time Series
  • Filter on Selected Cells
  • LAY
  • ROW
  • COL
  • CONC

MF6 DSP Package

The Dispersion (DSP) Package dialog

The Dispersion (DSP) Package dialog is accessed by double-clicking on the DSP package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options:

• Sections list – A list of sections that can be turned on or off:
  • COMMENTS – Turn on to make the COMMENTS section visible.
  • OPTIONS – Turn on to make the OPTIONS section visible.
  • GRIDDATA – Turn on to make the GRIDDATA section visible.
• COMMENTS section – Enter general alphanumeric comments. Comments entered here get written at the top of the file, preceded by a '#' symbol.
• OPTIONS section – Options and settings:
  • XT3D_OFF
  • XT3D_RHS
• GRIDDATA section – ...
  • Dataset to Array...
  • Define
  • Layered
  • Constant
  • DIFFC
  • ALH
  • ALV
  • ATH1
  • ATH2
  • ATV

MF6 DISV Package

The Discretization by Vertices (DISV) Package dialog

The Discretization by Vertices (DISV) Package dialog is accessed by double-clicking on the DISV package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options:

• Sections list – A list of sections that can be turned on or off:
  • COMMENTS – Turn on to make the COMMENTS section visible.
  • OPTIONS – Turn on to make the OPTIONS section visible.
  • DIMENSIONS – Turn on to make the DIMENSIONS section visible.
  • GRIDDATA – Turn on to make the GRIDDATA section visible.
  • VERTICES – Turn on to make the VERTICES section visible.
  • CELL2D – Turn on to make the CELL2D section visible.
• COMMENTS section – Enter general alphanumeric comments. Comments entered here get written at the top of the file, preceded by a '#' symbol.
• OPTIONS section – Options and settings:
  • LENGTH_UNITS
  • NOGRB
  • XORIGIN
  • YORIGIN
  • ANGROT
• DIMENSIONS section – ...
  • Number of layers (NLAY)
  • Number of cells per layer (NCPL)
  • Number of vertices (NVERT)
• GRIDDATA section – ...
  • Dataset to Array...
  • Define
  • Layered
  • Constant
  • TOP
  • BOTM
  • IDOMAIN
• VERTICES section – ...
• CELL2D section – ...

MF6 DISU Package

The Unstructured Discretization (DISU) Package dialog

The Unstructured Discretization (DISU) Package dialog is accessed by double-clicking on the DISU package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options:

• Sections list – A list of sections that can be turned on or off:
  • COMMENTS – Turn on to make the COMMENTS section visible.
  • OPTIONS – Turn on to make the OPTIONS section visible.
  • DIMENSIONS – Turn on to make the DIMENSIONS section visible.
  • GRIDDATA – Turn on to make the GRIDDATA section visible.
  • CONNECTIONDATA – Turn on to make the CONNECTIONDATA section visible.
  • VERTICES – Turn on to make the VERTICES section visible.
  • CELL2D – Turn on to make the CELL2D section visible.
• COMMENTS section – Enter general alphanumeric comments. Comments entered here get written at the top of the file, preceded by a '#' symbol.
• OPTIONS section – Options and settings:
  • LENGTH_UNITS
  • NOGRB
  • XORIGIN
  • YORIGIN
  • ANGROT
• DIMENSIONS section – ...
  • Number of nodes (NODES)
  • Number of connections and nodes (NJA)
  • Number of vertices (NVERT)
• GRIDDATA section – ...
  • TOP
  • BOT
  • AREA
  • IDOMAIN
• CONNECTIONDATA section – ...
  • IAC
  • JA
  • IHC
  • CL12
  • HWVA
  • ANGLDEGX
• VERTICES section – ...
• CELL2D section – ...

MF6 FMI Package

The Flow Model Interface (FMI) Package dialog

The Flow Model Interface (FMI) Package dialog is accessed by double-clicking on the FMI package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options:

• Sections list – A list of sections that can be turned on or off:
  • COMMENTS – Turn on to make the COMMENTS section visible.
  • OPTIONS – Turn on to make the OPTIONS section visible.
  • PACKAGEDATA – Turn on to make the PACKAGEDATA section visible.
• COMMENTS section – Enter general alphanumeric comments. Comments entered here get written at the top of the file, preceded by a '#' symbol.
• OPTIONS section – Options and settings:
  • FLOW_IMBALANCE_CORRECTION
• PACKAGEDATA section – ...
  • Let GMS determine the paths from the flow simulation when saving
    • Select Flow Simulation...
  • Add Rows...
  • FLOWTYPE
  • FNAME

MF6 GWT Package

The Groundwater Transport (GWT) Model Name File dialog

The Groundwater Transport (GWT) Model Name File dialog is accessed by double-clicking on the GWT model under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options:

• Sections list – A list of sections that can be turned on or off:
  • COMMENTS – Turn on to make the COMMENTS section visible.
  • OPTIONS – Turn on to make the OPTIONS section visible.
  • PACKAGES – Turn on to make the PACKAGES section visible.
• COMMENTS section – Enter general alphanumeric comments. Comments entered here get written at the top of the file, preceded by a '#' symbol.
• OPTIONS section – Options and settings:
  • LIST
  • PRINT_INPUT
  • PRINT_FLOWS
  • SAVE_FLOWS
• PACKAGES section – ...
  • ftype
  • fname
  • pname

MF6 IST Package

The Immobile Storage and Transfer (IST) Package dialog

The Immobile Storage and Transfer (IST) Package dialog is accessed by double-clicking on the IST package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options:

• Sections list – A list of sections that can be turned on or off:
  • COMMENTS – Turn on to make the COMMENTS section visible.
  • OPTIONS – Turn on to make the OPTIONS section visible.
  • GRIDDATA – Turn on to make the GRIDDATA section visible.
• COMMENTS section – Enter general alphanumeric comments. Comments entered here get written at the top of the file, preceded by a '#' symbol.
• OPTIONS section – Options and settings:
  • SAVE_FLOWS
  • SORPTION
  • FIRST_ORDER_DECAY
  • ZERO_ORDER_DECAY
  • CIM FILEOUT
  • CIM PRINT_FORMAT
• GRIDDATA section – ...
  • CIM
  • THETAIM
  • ZETAIM
  • DECAY
  • DECAY_SORBED
  • BULK_DENSITY
  • DISTCOEF

MF6 LKT Package

The Lake Transport (LKT) Package dialog

The Lake Transport (LKT) Package dialog is accessed by double-clicking on the LKT package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options:

• Sections list – A list of sections that can be turned on or off:
  • COMMENTS – Turn on to make the COMMENTS section visible.
  • OPTIONS – Turn on to make the OPTIONS section visible.
  • DATA – Turn on to make the DATA section visible.
• COMMENTS section – Enter general alphanumeric comments. Comments entered here get written at the top of the file, preceded by a '#' symbol.
• OPTIONS section – Options and settings:
  • FLOW_PACKAGE_NAME
  • AUXILIARY
  • FLOW_PACKAGE_AUXILIARY_NAME
  • BOUNDNAMES
  • PRINT_INPUT
  • PRINT_CONCENTRATION
  • PRINT_FLOWS
  • SAVE_FLOWS
  • CONCENTRATION FILEOUT
  • BUDGET FILEOUT
  • TS6 FILEIN
  • OBS6 FILEIN
• DATA section – ...
  • PACKAGEDATA
  • PERIODS

MF6 MST Package

The Mobile Storage and Transfer (MST) Package dialog

The Mobile Storage and Transfer (MST) Package dialog is accessed by double-clicking on the MST package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options:

• Sections list – A list of sections that can be turned on or off:
  • COMMENTS – Turn on to make the COMMENTS section visible.
  • OPTIONS – Turn on to make the OPTIONS section visible.
  • GRIDDATA – Turn on to make the GRIDDATA section visible.
• COMMENTS section – Enter general alphanumeric comments. Comments entered here get written at the top of the file, preceded by a '#' symbol.
• OPTIONS section – Options and settings:
  • SAVE_FLOWS
  • FIRST_ORDER_DECAY
  • ZERO_ORDER_DECAY
  • SORPTION
• GRIDDATA section – ...
  • POROSITY
  • DECAY
  • DECAY_SORBED
  • BULK_DENSITY
  • DISTCOEF
  • SP2