Template:GSSHA Contaminants Workflow

From XMS Wiki
Revision as of 20:41, 5 May 2023 by Mburton (talk | contribs) (Created page with "{|class="mw-collapsible mw-collapsed" style="width:100%; border:1px solid #BFC9C5; margin-bottom:0.4em;" |- !style="text-align:left;"|1. Add contaminants. |- | :#Open '''Job Control...''' under the GSSHA menu. :#Turn on ''Contaminant transport'' and edit the parameters. |} {|class="mw-collapsible mw-collapsed" style="width:100%; border:1px solid #BFC9C5; margin-bottom:0.4em;" |- !style="text-align:left;"|2. Set output control parameters. |- | :#Open '''Output Control...'...")

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search
1. Add contaminants.
  1. Open Job Control... under the GSSHA menu.
  2. Turn on Contaminant transport and edit the parameters.
2. Set output control parameters.
  1. Open Output Control... from the GSSHA Job Control Parameters dialog.
  2. Verify that Output contaminants is turned on and define all other necessary parameters.
3. Define contaminant coefficients in the channels.
  1. Open Output Control... from the GSSHA Job Control Parameters dialog.
  2. Click Edit Parameters... next to Channel routing computation scheme.
  3. Enter channel routing parameters.
4. Define contaminant parameters.
  1. Open Map Tables... under the GSSHA menu.
  2. Enter the necessary parameters on the Contaminants tab.
Retrieved from "https://www.xmswiki.com/index.php?title=Template:GSSHA_Contaminants_Workflow&oldid=159071"