SMS:ADH Model Control Global Material Properties
 |
This article is for a model that is under development by Aquaveo and its partners. The model is not available to the public at this time. It is not known when or if the model will be released. The content may not apply to current or older versions. |
 |
This page window is accessed from the Model Control window by clicking on the Material Properties tab.
ADH contains parameters that apply to all materials and parameters that are specific to (and must be defined for) each material. The parameters found within this tab are of the former type.
Dialog Description
Parameters (Untitled group box)
Uniform background viscosity positive real number edit field correlates to the MP MU card.
Gravitation acceleration positive real number edit field correlates to the MP G card.
Density positive real number edit field correlates to the MP RHO card.
Enable wetting/drying limits check box and the associated Dry depth and Wet depth positive real number edit fields correlate to the optional MP DTL card. If the water depth of a node is below the Dry depth, then the node is completely dry and is not included in the ADH shallow water equations. If the water depth is above the wet depth, then the node is included in the equations. A water depth which falls within these two depths will include the node in the equation with a restricting factor.
