User:Jcreer/TUFLOW FV Dialogs

Dialogs in TUFLOW FV have been built using the generic model interface.

TUFLOW FV Global Parameters

• Activate parameter group

General

• Bottom Drag Model – The default friction approach. Manning’s number will be used as the bottom drag model.
• CFL – Default limit is 1.
• Initial Water Level – The initial condition above the bed at the downstream end.

Time

• Time Format – Default is set to hours.
• Start Time – Initial time for first time step. Default is set to 0.0.
• End Time – Time of last time step.

Output

• Output Dir – Specify directory to create the output files.
• SMS Dat Output – Specifies the output file as an SMS data file or as a DATV file.
• Dat Output Types – Options are h, v, and d. Use h to output files with water level data. Use v to output velocity data. Use d to output water depth data.
• Dat Output Interval
• Flux Output
• Flux Output Interval

HD Parameters

• horizontal eddy viscosity calculation
• Global horizontal eddy viscosity

Advanced Parameters

• Command 1
• Command 2

TUFLOW FV Material Properties

The TUFLOW FV Material Properties dialog allows setting the roughness for materials defined in the general Materials Data dialog.

TUFLOW FV Nodestring Boundary Conditions

• Flow
• Water Level