User:Jcreer/MDOFLOW 6 New Packages

From XMS Wiki
Jump to navigationJump to search
Gnome globe current event.png
 This contains information about functionality available starting at GMS version 10.6.
The content may not apply to other versions.
GMS Icon.png

MF6 BUY Package

The Buoyancy (BUY) Package dialog

The Buoyancy (BUY) Package dialog is accessed by double-clicking on the BUY package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options:

  • Sections list – A list of sections that can be turned on or off:
    • Comments – Turn on to make the Comments section visible.
    • Options – Turn on to make the Options section visible.
    • PACKAGEDATA – Turn on to make the PACAKGEDATA section visible. This section is on by default.
  • Comments section – Enter general alphanumeric comments. Comments entered here get written at the top of the file, preceded by a '#' symbol.
  • Options section – Temporal options and settings:
    • HHFORMULATION_RHS – Using variable-density hydraulic head formulation on the right-hand, this prevents adding asymmetric terms to the flow matrix.
    • DENSEREF – This allows a fluid reference density to be specified in the equation of state. If not active to be specified, this value is set to 1000.
    • DENSITY FILEOUT – This allows the density to be saved to a binary output file that is specified.
  • PACKAGEDATA section – A spreadsheet section which contains the following:
    • Add Rows... – This button brings up a Rows to Add dialog, where a number can be specified to the right of Number of rows to add at bottom. This will help populate the spreadsheet.
    • IRHOSPEC – This column represents the IRHOSPEC integer values, which define the species numbers for the PACKAGEDATA on each line. These must be greater than zero and less than or equal to the separately defined NRHOSPECIES value. The program will terminate with an error if an NRHOSPECIES species doesn't have information specified, or if its information is specified more than once.
    • DRHODC – This column represents the DRHODC values, which define the slopes of the density-concentration lines used in the density equation of state.
    • CRHOREF – This column represents the CRHOREF values, which define the reference concentration values used in the density equation of state.
    • MODELNAME – This column represents the MODELNAME values, which names the GWT models that will be used to simulate species in the density equation of state. This will only work if the simulation includes a GWT model that corresponds to the name.
    • AUXSPECIESNAME – This column represents the AUXSPECIESNAME values, which names GWF stress package auxiliary variables that will be used to calculate a density value. The Buoyancy Package can use these simulated concentration values to calculate density values for lakes, streams, multi-aquifer wells, and unsaturated zone flow cells.


MF6 CSUB Package

The Skeletal Storage, Compaction, and Subsidence (CSUB) Package dialog

The Skeletal Storage, Compaction, and Subsidence (CSUB) Package dialog is accessed by double-clicking on the CSUB package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options:

  • Sections list – A list of sections that can be turned on or off:
    • COMMENTS – Turn on to make the COMMENTS section visible.
    • OPTIONS – Turn on to make the OPTIONS section visible.
    • GRIDDATA – Turn on to make the GRIDDATA section visible.
    • DATA – Turn on to make the DATA section visible. This section is on by default.
  • COMMENTS section – Enter general alphanumeric comments. Comments entered here get written at the top of the file, preceded by a '#' symbol.
  • OPTIONS section – Options and settings:
    • BOUNDNAMES
    • PRINT_INPUT
    • SAVE_FLOWS
    • GAMMAW
    • BETA
    • HEAD_BASED
    • INITIAL_PRECONSOLIDATION_HEAD
    • NDELAYCELLS
    • COMPRESSION_INDICES
    • UPDATE_MATERIAL_PROPERTIES
    • CELL_FRACTION
    • SPECIFIED_INITIAL_INTERBED_STATE
    • SPECIFIED_INITIAL_PRECONSOLIDATION_STRESS
    • SPECIFIED_INITIAL_DELAY_HEAD
    • EFFECTIVE_STRESS_LAG
    • STRAIN_CSV_INTERBED
    • STRAIN_CSV_COARSE
    • COMPACTION
    • COMPACTION_ELASTIC
    • COMPACTION_INELASTIC
    • COMPACTION_COARSE
    • ZDISPLACEMENT
    • PACKAGE_CONVERGENCE
    • TS6 FILEIN
    • OBS6 FILEIN
  • GRIDDATA section – Contains the following:
    • Dataset to Array...
    • CG_SKE_CR
    • CG_THETA
    • SGM
    • SGS
  • DATA section – Contains the following:
    • PACKAGEDATA
    • PERIODS


MF6 ADV Package

The Advection (ADV) Package dialog

The Advection (ADV) Package dialog is accessed by double-clicking on the ADV package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options:

  • Sections list – A list of sections that can be turned on or off:
    • COMMENTS – Turn on to make the COMMENTS section visible.
    • OPTIONS – Turn on to make the OPTIONS section visible.
  • COMMENTS section – Enter general alphanumeric comments. Comments entered here get written at the top of the file, preceded by a '#' symbol.
  • OPTIONS section – Options and settings:
    • SCHEME


MF6 CNC Package

The Constant Concentration (CNC) Package dialog

The Constant Concentration (CNC) Package dialog is accessed by double-clicking on the CNC package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options:

  • Sections list – A list of sections that can be turned on or off:
    • COMMENTS – Turn on to make the COMMENTS section visible.
    • OPTIONS – Turn on to make the OPTIONS section visible.
    • PERIODS – Turn on to make the PERIODS section visible.
  • COMMENTS section – Enter general alphanumeric comments. Comments entered here get written at the top of the file, preceded by a '#' symbol.
  • OPTIONS section – Options and settings:
    • AUXILIARY
    • AUXMULTNAME
    • BOUNDNAMES
    • PRINT_INPUT
    • PRINT_FLOWS
    • SAVE_FLOWS
    • TS6 FILEIN
    • OBS6 FILEIN
  • PERIODS section – ...
    • Period
    • Define Period
    • Delete Period
    • Add Rows
    • Delete Rows
    • Plot All Periods
    • Open Time Series
    • Filter on Selected Cells
    • LAY
    • ROW
    • COL
    • CONC


MF6 DSP Package

The Dispersion (DSP) Package dialog

The Dispersion (DSP) Package dialog is accessed by double-clicking on the DSP package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options:

  • Sections list – A list of sections that can be turned on or off:
    • COMMENTS – Turn on to make the COMMENTS section visible.
    • OPTIONS – Turn on to make the OPTIONS section visible.
    • GRIDDATA – Turn on to make the GRIDDATA section visible.
  • COMMENTS section – Enter general alphanumeric comments. Comments entered here get written at the top of the file, preceded by a '#' symbol.
  • OPTIONS section – Options and settings:
    • XT3D_OFF
    • XT3D_RHS
  • GRIDDATA section – ...
    • Dataset to Array...
    • Define
    • Layered
    • Constant
    • DIFFC
    • ALH
    • ALV
    • ATH1
    • ATH2
    • ATV


MF6 DISV Package

The Discretization by Vertices (DISV) Package dialog

The Discretization by Vertices (DISV) Package dialog is accessed by double-clicking on the DISV package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options:

  • Sections list – A list of sections that can be turned on or off:
    • COMMENTS – Turn on to make the COMMENTS section visible.
    • OPTIONS – Turn on to make the OPTIONS section visible.
    • DIMENSIONS – Turn on to make the DIMENSIONS section visible.
    • GRIDDATA – Turn on to make the GRIDDATA section visible.
    • VERTICES – Turn on to make the VERTICES section visible.
    • CELL2D – Turn on to make the CELL2D section visible.
  • COMMENTS section – Enter general alphanumeric comments. Comments entered here get written at the top of the file, preceded by a '#' symbol.
  • OPTIONS section – Options and settings:
    • LENGTH_UNITS
    • NOGRB
    • XORIGIN
    • YORIGIN
    • ANGROT
  • DIMENSIONS section – ...
    • Number of layers (NLAY)
    • Number of cells per layer (NCPL)
    • Number of vertices (NVERT)
  • GRIDDATA section – ...
    • Dataset to Array...
    • Define
    • Layered
    • Constant
    • TOP
    • BOTM
    • IDOMAIN
  • VERTICES section – ...
  • CELL2D section – ...


MF6 DISU Package

The Unstructured Discretization (DISU) Package dialog

The Unstructured Discretization (DISU) Package dialog is accessed by double-clicking on the DISU package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options:

  • Sections list – A list of sections that can be turned on or off:
    • COMMENTS – Turn on to make the COMMENTS section visible.
    • OPTIONS – Turn on to make the OPTIONS section visible.
    • DIMENSIONS – Turn on to make the DIMENSIONS section visible.
    • GRIDDATA – Turn on to make the GRIDDATA section visible.
    • CONNECTIONDATA – Turn on to make the CONNECTIONDATA section visible.
    • VERTICES – Turn on to make the VERTICES section visible.
    • CELL2D – Turn on to make the CELL2D section visible.
  • COMMENTS section – Enter general alphanumeric comments. Comments entered here get written at the top of the file, preceded by a '#' symbol.
  • OPTIONS section – Options and settings:
    • LENGTH_UNITS
    • NOGRB
    • XORIGIN
    • YORIGIN
    • ANGROT
  • DIMENSIONS section – ...
    • Number of nodes (NODES)
    • Number of connections and nodes (NJA)
    • Number of vertices (NVERT)
  • GRIDDATA section – ...
    • TOP
    • BOT
    • AREA
    • IDOMAIN
  • CONNECTIONDATA section – ...
    • IAC
    • JA
    • IHC
    • CL12
    • HWVA
    • ANGLDEGX
  • VERTICES section – ...
  • CELL2D section – ...


MF6 FMI Package

The Flow Model Interface (FMI) Package dialog

The Flow Model Interface (FMI) Package dialog is accessed by double-clicking on the FMI package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options:

  • Sections list – A list of sections that can be turned on or off:
    • COMMENTS – Turn on to make the COMMENTS section visible.
    • OPTIONS – Turn on to make the OPTIONS section visible.
    • PACKAGEDATA – Turn on to make the PACKAGEDATA section visible.
  • COMMENTS section – Enter general alphanumeric comments. Comments entered here get written at the top of the file, preceded by a '#' symbol.
  • OPTIONS section – Options and settings:
    • FLOW_IMBALANCE_CORRECTION
  • PACKAGEDATA section – ...
    • Let GMS determine the paths from the flow simulation when saving
      • Select Flow Simulation...
    • Add Rows...
    • FLOWTYPE
    • FNAME


MF6 GWT Package

The Groundwater Transport (GWT) Model Name File dialog

The Groundwater Transport (GWT) Model Name File dialog is accessed by double-clicking on the GWT model under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options:

  • Sections list – A list of sections that can be turned on or off:
    • COMMENTS – Turn on to make the COMMENTS section visible.
    • OPTIONS – Turn on to make the OPTIONS section visible.
    • PACKAGES – Turn on to make the PACKAGES section visible.
  • COMMENTS section – Enter general alphanumeric comments. Comments entered here get written at the top of the file, preceded by a '#' symbol.
  • OPTIONS section – Options and settings:
    • LIST
    • PRINT_INPUT
    • PRINT_FLOWS
    • SAVE_FLOWS
  • PACKAGES section – ...
    • ftype
    • fname
    • pname


MF6 IST Package

The Immobile Storage and Transfer (IST) Package dialog

The Immobile Storage and Transfer (IST) Package dialog is accessed by double-clicking on the IST package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options:

  • Sections list – A list of sections that can be turned on or off:
    • COMMENTS – Turn on to make the COMMENTS section visible.
    • OPTIONS – Turn on to make the OPTIONS section visible.
    • GRIDDATA – Turn on to make the GRIDDATA section visible.
  • COMMENTS section – Enter general alphanumeric comments. Comments entered here get written at the top of the file, preceded by a '#' symbol.
  • OPTIONS section – Options and settings:
    • SAVE_FLOWS
    • SORPTION
    • FIRST_ORDER_DECAY
    • ZERO_ORDER_DECAY
    • CIM FILEOUT
    • CIM PRINT_FORMAT
  • GRIDDATA section – ...
    • CIM
    • THETAIM
    • ZETAIM
    • DECAY
    • DECAY_SORBED
    • BULK_DENSITY
    • DISTCOEF


MF6 LKT Package

The Lake Transport (LKT) Package dialog

The Lake Transport (LKT) Package dialog is accessed by double-clicking on the LKT package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options:

  • Sections list – A list of sections that can be turned on or off:
    • COMMENTS – Turn on to make the COMMENTS section visible.
    • OPTIONS – Turn on to make the OPTIONS section visible.
    • DATA – Turn on to make the DATA section visible.
  • COMMENTS section – Enter general alphanumeric comments. Comments entered here get written at the top of the file, preceded by a '#' symbol.
  • OPTIONS section – Options and settings:
    • FLOW_PACKAGE_NAME
    • AUXILIARY
    • FLOW_PACKAGE_AUXILIARY_NAME
    • BOUNDNAMES
    • PRINT_INPUT
    • PRINT_CONCENTRATION
    • PRINT_FLOWS
    • SAVE_FLOWS
    • CONCENTRATION FILEOUT
    • BUDGET FILEOUT
    • TS6 FILEIN
    • OBS6 FILEIN
  • DATA section – ...
    • PACKAGEDATA
    • PERIODS


MF6 MST Package

The Mobile Storage and Transfer (MST) Package dialog

The Mobile Storage and Transfer (MST) Package dialog is accessed by double-clicking on the MST package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options:

  • Sections list – A list of sections that can be turned on or off:
    • COMMENTS – Turn on to make the COMMENTS section visible.
    • OPTIONS – Turn on to make the OPTIONS section visible.
    • GRIDDATA – Turn on to make the GRIDDATA section visible.
  • COMMENTS section – Enter general alphanumeric comments. Comments entered here get written at the top of the file, preceded by a '#' symbol.
  • OPTIONS section – Options and settings:
    • SAVE_FLOWS
    • FIRST_ORDER_DECAY
    • ZERO_ORDER_DECAY
    • SORPTION
  • GRIDDATA section – ...
    • POROSITY
    • DECAY
    • DECAY_SORBED
    • BULK_DENSITY
    • DISTCOEF
    • SP2


MF6 MVT Package

The Mover Transport (MVT) Package dialog

The Mover Transport (MVT) Package dialog is accessed by double-clicking on the MVT package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options:

  • Sections list – A list of sections that can be turned on or off:
    • COMMENTS – Turn on to make the COMMENTS section visible.
    • OPTIONS – Turn on to make the OPTIONS section visible.
  • COMMENTS section – Enter general alphanumeric comments. Comments entered here get written at the top of the file, preceded by a '#' symbol.
  • OPTIONS section – Options and settings:
    • PRINT_INPUT
    • PRINT_FLOWS
    • SAVE_FLOWS
    • BUDGET FILEOUT


MF6 MWT Package

The Multi-Aquifer Well Transport (MWT) Package dialog

The Multi-Aquifer Well Transport (MWT) Package dialog is accessed by double-clicking on the MWT package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options:

  • Sections list – A list of sections that can be turned on or off:
    • COMMENTS – Turn on to make the COMMENTS section visible.
    • OPTIONS – Turn on to make the OPTIONS section visible.
    • DATA – Turn on to make the DATA section visible.
  • COMMENTS section – Enter general alphanumeric comments. Comments entered here get written at the top of the file, preceded by a '#' symbol.
  • OPTIONS section – Options and settings:
    • FLOW_PACKAGE_NAME
    • AUXILIARY
    • FLOW_PACKAGE_AUXILIARY_NAME
    • BOUNDNAMES
    • PRINT_INPUT
    • PRINT_CONCENTRATION
    • PRINT_FLOWS
    • SAVE_FLOWS
    • CONCENTRATION FILEOUT
    • BUDGET FILEOUT
    • TS6 FILEIN
    • OBS6 FILEIN
  • DATA section – ...
    • PACKAGEDATA
    • PERIODS


MF6 SFT Package

The Streamflow Transport (SFT) Package dialog

The Streamflow Transport (SFT) Package dialog is accessed by double-clicking on the SFT package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options:

  • Sections list – A list of sections that can be turned on or off:
    • COMMENTS – Turn on to make the COMMENTS section visible.
    • OPTIONS – Turn on to make the OPTIONS section visible.
    • DATA – Turn on to make the DATA section visible.
  • COMMENTS section – Enter general alphanumeric comments. Comments entered here get written at the top of the file, preceded by a '#' symbol.
  • OPTIONS section – Options and settings:
    • FLOW_PACKAGE_NAME
    • AUXILIARY
    • FLOW_PACKAGE_AUXILIARY_NAME
    • BOUNDNAMES
    • PRINT_INPUT
    • PRINT_CONCENTRATION
    • PRINT_FLOWS
    • SAVE_FLOWS
    • CONCENTRATION FILEOUT
    • BUDGET FILEOUT
    • TS6 FILEIN
    • OBS6 FILEIN
  • DATA section – ...
    • PACKAGEDATA
    • PERIODS


MF6 SRC Package

The Mass Source Loading (SRC) Package dialog

The Mass Source Loading (SRC) Package dialog is accessed by double-clicking on the SRC package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options:

  • Sections list – A list of sections that can be turned on or off:
    • COMMENTS – Turn on to make the COMMENTS section visible.
    • OPTIONS – Turn on to make the OPTIONS section visible.
    • PERIODS – Turn on to make the PERIODS section visible.
  • COMMENTS section – Enter general alphanumeric comments. Comments entered here get written at the top of the file, preceded by a '#' symbol.
  • OPTIONS section – Options and settings:
    • AUXILIARY
    • AUXMULTNAME
    • BOUNDNAMES
    • PRINT_INPUT
    • PRINT_FLOWS
    • SAVE_FLOWS
    • TS6 FILEIN
    • OBS6 FILEIN
  • PERIODS section – ...
    • Period
    • Define Period
    • Delete Period
    • Add Rows
    • Delete Rows
    • Plot All Periods
    • Open Time Series
    • Filter on Selected Cells
    • LAY
    • ROW


MF6 SSM Package

The Source and Sink Mixing (SSM) Package dialog

The Source and Sink Mixing (SSM) Package dialog is accessed by double-clicking on the SSM package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options:

  • Sections list – A list of sections that can be turned on or off:
    • COMMENTS – Turn on to make the COMMENTS section visible.
    • OPTIONS – Turn on to make the OPTIONS section visible.
    • SOURCES – Turn on to make the SOURCES section visible.
  • COMMENTS section – Enter general alphanumeric comments. Comments entered here get written at the top of the file, preceded by a '#' symbol.
  • OPTIONS section – Options and settings:
    • PRINT_FLOWS
    • SAVE_FLOWS
  • SOURCES section – ...
    • Set Up From Flow Model
    • Add Rows...
    • PNAME
    • SRCTYPE


MF6 UZT Package

The Unsaturated Zone Transport (UZT) Package dialog

The Unsaturated Zone Transport (UZT) Package dialog is accessed by double-clicking on the UZT package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options:

  • Sections list – A list of sections that can be turned on or off:
    • COMMENTS – Turn on to make the COMMENTS section visible.
    • OPTIONS – Turn on to make the OPTIONS section visible.
    • DATA – Turn on to make the DATA section visible.
  • COMMENTS section – Enter general alphanumeric comments. Comments entered here get written at the top of the file, preceded by a '#' symbol.
  • OPTIONS section – Options and settings:
    • FLOW_PACKAGE_NAME
    • AUXILIARY
    • FLOW_PACKAGE_AUXILIARY_NAME
    • BOUNDNAMES
    • PRINT_INPUT
    • PRINT_CONCENTRATION
    • PRINT_FLOWS
    • SAVE_FLOWS
    • CONCENTRATION FILEOUT
    • BUDGET FILEOUT
    • TS6 FILEIN
    • OBS6 FILEIN
  • DATA section – ...
    • PACKAGEDATA
    • PERIODS


Arrays to Datasets

GWF-GWF Exchange

The Groundwater Flow (GWF) Exchange dialog

The Groundwater Flow (GWF) Exchange dialog is accessed by double-clicking on the GWF-GWF package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options:

  • Sections list – A list of sections that can be turned on or off:
    • COMMENTS – Turn on to make the COMMENTS section visible.
    • OPTIONS – Turn on to make the OPTIONS section visible.
    • EXCHANGEDATA – Turn on to make the EXCHANGEDATA section visible.
  • COMMENTS section – Enter general alphanumeric comments. Comments entered here get written at the top of the file, preceded by a '#' symbol.
  • OPTIONS section – Options and settings:
    • AUXILIARY
    • PRINT_INPUT
    • PRINT_FLOWS
    • SAVE_FLOWS
    • CELL_AVERAGING
    • VARIABLECV
    • NEWTON
    • GNC6 FILEIN
    • MVR6 FILEIN
    • OBS6 FILEIN
  • EXCHANGEDATA section – ...
    • Add Rows...
    • LAYM1
    • ROWM1
    • COLM1
    • LAYM2
    • ROWM2
    • COLM2
    • IHC
    • CL1
    • CL2
    • HWVA


GWF-GWT Exchange

The Groundwater Transport (GWT) Exchange dialog

The Groundwater Transport (GWT) Exchange dialog is accessed by double-clicking on the GWF-GWT package under a MODFLOW 6 simulation in the Project Explorer. It contains the following sections and options:

  • Sections list – A list of sections that can be turned on or off:
    • COMMENTS – Turn on to make the COMMENTS section visible.
  • COMMENTS section – Enter general alphanumeric comments. Comments entered here get written at the top of the file, preceded by a '#' symbol.


MODFLOW 6 GWF/GWT Display Options

MODFLOW 6 GWF/GWF Display Options

Retrieved from "https://www.xmswiki.com/index.php?title=User:Jcreer/MDOFLOW_6_New_Packages&oldid=149876"