Template:Refine 2D Mesh by Error

From XMS Wiki
Revision as of 22:55, 28 May 2024 by Jcreer (talk | contribs) (Created page with "__NOINDEX__ __NOTOC__ ===Refine 2D Mesh by Error=== <!--====Tool description====--> The ''Refine 2D Mesh by Error'' tool creates a 2D mesh that has been refined based on an existing 2D mesh and one or more elevation rasters. ====Input parameters==== *''Mesh'' – Select the 2D mesh that will be refined. *''Error threshold'' – Enter a value to guide the acceptable threshold for error for the mesh refinement. *''Maximum iterations'' – The tool will perfor...")

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search


Refine 2D Mesh by Error

The Refine 2D Mesh by Error tool creates a 2D mesh that has been refined based on an existing 2D mesh and one or more elevation rasters.

Input parameters

  • Mesh – Select the 2D mesh that will be refined.
  • Error threshold – Enter a value to guide the acceptable threshold for error for the mesh refinement.
  • Maximum iterations – The tool will perform multiple iterations when refining the new mesh. Enter the maximum number of iterations to perform. The tool will stop performing iterations once it has reached the maximum limit if it has not completed refinement before this value is reached.
  • Raster 1 (highest priority) – The elevation raster that will be used for refinement. This raster will be given priority over any additional rasters being used.
  • Raster n – Allows selecting an additional raster to use in refinement.

Output parameters

  • Output mesh name – Enter the name for the new refined mesh.

Current Location in toolbox

2D Mesh/Refine 2D Mesh by Error