Template:Breach Depressions

From XMS Wiki
Revision as of 20:45, 24 October 2024 by Cmadsen (talk | contribs) (Created page with "__NOINDEX__ __NOTOC__ ==Breach Depressions== The ''Breach Depressions'' tool is used to remove depressions in a digital elevation model (DEM) raster file. It uses a breach-first, fill-second approach to resolve continuous flowpaths through depressions. <!-- Whitebox describes this as less satisfactory, higher impact, less efficient, and as a legacy product. They urge users to use the Bread Depressions Least Cost tool instead --> ===Input Parameters=== *''Input raster D...")

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search


Breach Depressions

The Breach Depressions tool is used to remove depressions in a digital elevation model (DEM) raster file. It uses a breach-first, fill-second approach to resolve continuous flowpaths through depressions.

Input Parameters

  • Input raster DEM file: – Select the raster DEM to use in the tool.
  • Optional flag indicating whether to fill single-cell pits – Checking this tells the tool raise the pit elevations on single-cell pits to that of the lowest neighbor rather than creating a deep breach. Turning this on may add to the run time of the tool.

Output Parameters

  • Output raster file: – Enter a name for the adjusted raster file.

Toolbox Location

Rasters/Breach Depressions

Related Links