HY8:Troubleshooting

From XMS Wiki
Revision as of 17:52, 27 January 2015 by EJones (talk | contribs)
Jump to navigationJump to search


Troubleshooting

If you have problems running HY-8, see if the following sections will help. If you continue to have issues or questions relating to accuracy or specific modeling issues, we encourage you to contact the Federal Highways Administration. As common troubleshooting problems and solutions are discovered, they will be added to this section.

Registering Libraries

Contacting FHWA

v • e
HY-8
Introduction:Getting Started   •   Layout   •   Vena Contracta   •   Building a Project   •   Locate Project   •   Culvert Crossing Data   •   Run Analysis   •   Report Generation
Crossing and Culvert Data:Crossings   •   Discharge Data   •   Roadway Data   •   Tailwater Data   •   Irregular Channel   •   Culvert Data   •   Site Data   •   Culvert Invert Data   •   Embankment Toe Data
AnalysisProject Units   •   Roadway Overtopping   •   Inlet Control Computations   •   Outlet Control Computations   •   Tables and Plots
Energy DissipationScour Hole Geometry   •   Increased Resistance   •   Tumbling Flow   •   USBR Type IX Baffled Apron   •   Drop Structures   •   Stilling Basins   •   Streambed Level Structures
MethodsAquatic Organism Passage   •   Low Flow Hydraulics
TroubleshootingDifferences from DOS HY-8   •   Limitations   •   HY-8 User Manual
Retrieved from "https://www.xmswiki.com/index.php?title=HY8:Troubleshooting&oldid=82617"