Template:SMS Review-Edit Elevation Data Workflow

From XMS Wiki
Revision as of 20:47, 2 September 2015 by Jcreer (talk | contribs) (Undo revision 91509 by Jcreer (talk))

Jump to navigationJump to search
1. Review elevation data.

Template:SMS Review Imported Data

2. Remove erroneous points.
After reviewing the imported data, points or the triangles covering regions of no data should be deleted.
1. Use the Scatter Options dialog.
  1. Open the Scatter Options dialog.
  2. Select or delete duplicate points.
  3. Select or delete long triangles.
  4. Select thin triangles.
  5. Use a triangulation optimization option.
2. Manually remove points.
  1. Use Select Scatter Point Select Point Tool.svg tool to select erroneous points in the scatter set.
  2. Review and edit point data in the Edit Window.
  3. Delete erroneous points.
3. Add breaklines.
1. Create breaklines.
  1. Select the Create Breakline SMS Create Nodestring Tool.svg tool.
  2. Click along points of a common elevation, such as at a bank toe or levee crest, to connect these points in the surface.
  3. Use the Backspace key to back up if an erroneous selection is made.
  4. Double-click or press Enter key to complete the breakline.
2. Force breaklines in a scatter set.
  1. Use the Force Breaklines command in the Breaklines menu.
  2. Set breakline options in the Scatter Breakline Options dialog.
4. Merge elevation datasets.
  1. Select the Scatter | Merge Sets command.
  2. Use the Merge Scatter Sets dialog to select elevation data to be merged.
Retrieved from "https://www.xmswiki.com/index.php?title=Template:SMS_Review-Edit_Elevation_Data_Workflow&oldid=91510"