GMS:Borehole Cross Sections

From XMS Wiki
Jump to navigationJump to search
Boreholes Module
Holes1.png
Boreholes Links
Creating and Editing Boreholes
Borehole Hydrogeologic Units
Converting Borehole Data
More
Borehole Cross Sections
Borehole Display Options
Borehole Tool Palette
Borehole Commands

A borehole cross section is a set of polylines and polygons that define the stratigraphy between two boreholes. A borehole cross section can be created manually or automatically.

Creation

Automatic creation

Cross sections can be created automatically using the Boreholes | [Auto-Create Blank Cross Sections menu command. This uses a triangulation process to determine the most likely connections between boreholes. The top and/or bottom arcs of the new cross sections can be warped to match the elevation of TIN surfaces using the Snap Cross Sections to TIN dialog which appears when the Boreholes | Auto-Create Blank Cross Sections command is executed. Snapping the tops and bottoms of cross sections to TIN surfaces can also be done at any time via the Boreholes | Advanced | Snap Cross Sections to TIN menu command. Keep in mind, however, that warping the top and bottom of a cross section may interfere with the internal polygons that are defined in the cross section, so snapping to a TIN is best done before filling in the cross sections.

Manual creation

Cross sections can be created manually by using the Create Cross Section tool and clicking on boreholes.

Editing

When a borehole cross section is first created, it is made up of a set of default lines. The figure below shows a default cross section. Notice that "arcs" (polylines) have been created defining the top and bottom of the cross section and an "arc" (polyline) has been created for each segment in the boreholes.

Default cross section

Automatic editing

The Boreholes | Auto-Fill Blank Cross Sections menu command can be used to automatically fill in all existing blank cross sections. The command can use either the horizon IDs (preferred) or materials information on the boreholes.

Manual editing

To edit a cross section manually, the user must use the Select Cross Section tool and select a cross section. The Cross Section Editor dialog can be then opened by selecting the Cross Section Editor command from the Borehole menu while the user has either a single or a series of cross sections selected. The user can also launch the Cross Section Editor dialog by double-clicking on a single cross section. The next figure shows a finished cross section.

Complete cross section

Restrictions

GMS imposes the following restrictions on cross sections that should be kept in mind when editing:

  1. All polygons must be connected to boreholes
  2. All arcs must connect to borehole contacts

Borehole Cross Section Editor

The Cross Section Editor can be used to manually construct and view cross sections between boreholes. The Cross Section Editor in GMS 6.5 has been updated to allow for the display and editing of multiple borehole cross sections. The Cross Section Editor has a set of tools and toggles used to create, edit, and view the cross sections. The tools used to create the nodes, polylines, and polygons are similar to the tools available in the Map module used to create feature objects (points, arcs, and polygons). The following tables describe the tools and display options available in the Cross Section Editor.

Tools

Tool Tool Name Description
File:Select Object.bmp Select Tool Generic selection tool that selects nodes, vertices, arcs, and polygons
File:Tool SelectNode.gif Select Point/Node Selection tool that will only select points or nodes
File:Tool SelectVertex.gif Select Vertex Selection tool that will only select vertices
File:Tool SelectArc.gif Select Arc Selection tool that will only select arcs
File:Tool SelectPoly.gif Select Polygon Selection tool that will only select polygons
File:Tool CreateVertex.gif Create Vertex Creates new vertices along arcs within the cross section
File:Tool CreateArc.gif Create Arc Creates arcs between two nodes or vertices within the cross section
File:Tool Pan.GIF Pan Pans in the viewing area of the Graphics Window
File:Tool Zoom.GIF Zoom Magnifies or shrinks the current viewing area
File:Tool FrameAllXSects.GIF Frame All Cross Sections Frames to the extents of all the cross sections
File:Tool FrameCurrentXSect.GIF Frame Current Cross Section Frames to the extents of the current cross section
File:Tool ZMagnification.GIF Z-Magnification Adjusts the Z-Magnification factor to increase or decrease the graphical display along the Y (real world Z) axis, making more or less room at the top and bottom of the screen while maintaining the boreholes and cross sections in the middle of the screen
File:Tool PlotOptions.GIF Plot Options Adjusts the axes plot options, including: title, background color, font, font color, grid display, axes titles, and axes display
File:Tool Delete.GIF Delete Deletes the currently selected vertices, nodes, arcs, or polygons
File:Tool Left.GIF Left Activates the cross section to the left of the current cross section as the current cross section
File:Tool Right.GIF Right Activates the cross section to the right of the current cross section as the current cross section
File:Print.jpg Print Prints the current Graphics Window
File:Tool AutoMatch.GIF Auto-Match Cross Section Creates a set of straight arcs connecting matching contacts on adjacent boreholes based on the user's selection to use Horizons or Materials
File:Tool CreatePoly.GIF Build Cross Section Polygons Deletes all current polygons, builds new polygons using all of the arcs, and checks to see if every polygon built is valid. A polygon is valid only if it contains either one arc representing a borehole region or two arcs representing two matching borehole regions on two holes. Thus, every valid polygon can be assigned one and only one material type. If every polygon built is valid, the Color Fill toggle will be automatically turned on and all polygons built will be filled with the color representing the material they are assigned. Otherwise, a dialog saying "Invalid polygons present" will pop up and all polygons built will be deleted.
File:Tool DeleteAll.GIF Delete All Deletes all of the vertices, nodes, arcs, and polygons in the current cross section

Display Options

Display Toggle Description
Nodes Controls the display of the nodes in the graphics window
Vertices Controls the display of the vertices in the graphics window
Arcs Controls the display of the arcs in the graphics window
Boreholes Controls the display of the arcs in the graphics window
Poly fill Controls the display of the polygons in the graphics window
Mirror view Reverses the order in which the cross sections are displayed
Mark inactive Dims the inactive cross sections
Display axes Controls the display of the plot axes in the graphics window
Material legend Controls the display of the material legend