GMS:Feature Object Commands

From XMS Wiki
Revision as of 20:57, 11 November 2013 by Jcreer (talk | contribs)
Jump to navigationJump to search
GMS Commands
Common
File
Edit
Display
Modules
TINs
Boreholes
Solids
Mesh (2D)
Grid (2D)
Scatter Points (2D)
Interpolation (2D and 3D)
Mesh (3D)
Grid (3D)
Scatter Points (3D)
Feature Objects
GIS
UGrid
Models
FEMWATER
MODAEM
MODFLOW
mod-PATH3DU
MODPATH
MT3DMS
SEAWAT
SEEP2D
T-PROGS
UTEXAS

The Feature Objects menu becomes available when the Conceptual model, or Map model, is active. The menu has the following commands:

  • Build Polygons
    Creates polygons out of closed arcs.
  • Vertices↔Nodes
    Switches selected vertices to nodes and vise verse.
  • Vertices → Nodes
    Switches selected vertices to nodes.
  • Nodes → Vertices
    Switches selected nodes to vertices.
  • Redistribute Vertices...
    Redistributes the amount of vertices on a selected arc using a user input value for spacing.
  • Create Arc Group
    Creates the select multiple arcs as one. All arcs are still separate arcs, but one group.
  • Reverse Arc Direction
    Arcs have a direction that follows the path that they were made. Direction is important with some parameters and need to be consistent throughout the model.
  • Clean...
    Selecting the Clean command brings up the Clean dialog. See Clean Command for more information.
  • Find Feature Object...
    Select a feature object using the object ID.
  • New Grid Frame
    Creates a new grid frame object in the project explorer.
  • Activate Cells in Coverage(s)
    After creating a coverage that defines the model boundary and creating a grid, just the cells that are in the active coverage with remain active.
  • Arc(s) → Cross Section
    Opens the Arcs → Cross Sections dialog. See Arc → Cross Sections for more information.
  • Map → TIN
    This command creates a TIN using each polygon in the coverage.
  • Map → 2D Mesh
    This command creates a 2D Mesh on the interior of all of the polygons in the current coverage. See Map to 2D Mesh for more information.
  • Map → 2D Grid
    Opens the Create Grid dialog. See Map to 2D Grid for more information.
  • Map → 3D Grid
    Opens the Create Grid dialog. See Map to 3D Grid for more information.
  • Map → 2D Scatter Points
    Creates a scatter point set from the points and nodes and vertices of the current coverage. See Map to 2D Scatter Points for more information.
  • Map → 3D Scatter Points
    Creates a scatter point set from the points and nodes and vertices of the current coverage. See Map to 3D Scatter Points for more information.
  • Map → MODFLOW
    Opens the Map → MODFLOW Options dialog. See Map to MODFLOW for more information.
  • Map → SEAM3D
  • Map → FEMWATER
    This command assigns the wells, boundary conditions, and recharge zones assigned to the points, arcs, and polygons. See Map to FEMWATER for more information.
  • Map → SEEP2D
  • Map → WASH123D
  • Map → ADH
  • Copy to Coverage...
Opens a dialog allowing for selection of one or more coverages which selected feature objects will be copied to. This may result in overlapping and/or intersecting objects.

Related Topics