Difference between revisions of "GMS:Horizons Wizard"

From XMS Wiki
Jump to navigationJump to search
 
Line 1: Line 1:
 +
{{Horizons Links}}
 
The Horizons Wizard is used to create [[GMS:Solid Module|solids]], a [[GMS:3D Mesh Module|3D mesh]], or [[GMS:HUF Package|HUF]] layers from [[GMS:Horizons|horizon]] data. The wizard is started via the ''[[GMS:Horizons to Solids|Horizons -> Solids]]'', ''[[GMS:Horizons to 3D Mesh|Horizons -> 3D Mesh]]'', and ''[[GMS:Horizons to HUF|Horizons -> HUF]]'' commands. These commands are in the TIN and Boreholes menus.  
 
The Horizons Wizard is used to create [[GMS:Solid Module|solids]], a [[GMS:3D Mesh Module|3D mesh]], or [[GMS:HUF Package|HUF]] layers from [[GMS:Horizons|horizon]] data. The wizard is started via the ''[[GMS:Horizons to Solids|Horizons -> Solids]]'', ''[[GMS:Horizons to 3D Mesh|Horizons -> 3D Mesh]]'', and ''[[GMS:Horizons to HUF|Horizons -> HUF]]'' commands. These commands are in the TIN and Boreholes menus.  
  

Revision as of 17:28, 8 March 2012

Horizons
HorCoverage.png
Links
Horizons
Horizons to Solids
Horizons to 3D Mesh
Horizons to UGrid
Horizons to HUF
Horizons Wizard
Including Borehole Cross Sections
Raster Catalog
Horizons Conceptual Model
Horizons Applications

The Horizons Wizard is used to create solids, a 3D mesh, or HUF layers from horizon data. The wizard is started via the Horizons -> Solids, Horizons -> 3D Mesh, and Horizons -> HUF commands. These commands are in the TIN and Boreholes menus.

Step 1

The first step is to define the inputs to be used, which can include boreholes, TINs, and a Horizon Conceptual Model.

Step 2

The second step is to define the top and bottom of the solid, mesh, or HUF layers. When creating HUF data, you may also edit the grid elevations.

Step 3

The third step is to define the interpolation method to be used, as well as options specific to creating solids, a mesh, or HUF package.

Beginning with GMS 7.0, when creating solids, the user can choose the option Preserve projection TIN data sets. This option will create a new TIN that will have a data set for each horizon. This is often useful so that the user can see the result of the interpolation process for each Horizon. The user can then edit the TIN by hand and include the TIN when executing the Horizons->Solids command.