GMS:Raster Catalog: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
 
(15 intermediate revisions by 2 users not shown)
Line 4: Line 4:
A raster catalog is an attribute table that references [[GMS:Rasters|rasters]] that are currently loaded into the GMS project. Raster catalogs are used for interpolation and to create solids from horizons.
A raster catalog is an attribute table that references [[GMS:Rasters|rasters]] that are currently loaded into the GMS project. Raster catalogs are used for interpolation and to create solids from horizons.


==Creation==
==Create a Raster Catalog==
To create a raster catalog simply select some rasters from the Project Explorer, right-click and select the ''New Raster Catalog'' command.
To create a raster catalog, simply select the desired rasters in the Project Explorer, right-click and select the '''New Raster Catalog''' command. A new "[[File:Scalar Dataset Active.svg|15 px]] Raster Catalog" item will then appear in the Project Explorer.


==Interpolation==
The figure below shows a sample of the ''Raster Catalog'' dialog.
A raster catalog can be interpolated to other GMS objects (TINs, meshes etc) by right-clicking on the raster catalog and selecting the desired interpolation command. Unlike interpolating from multiple selected rasters, when interpolating from a raster catalog, only one dataset will be created.


==Horizons → Solids==
:[[File:raster_catalog_table.png|thumb|none|380 px|Example of the ''Raster Catalog'' dialog.]]
Raster catalogs are used to create solids using the Horizons → Solids method. Each raster represents the top of a horizon. The figure below shows a sample raster catalog.


[[Image:raster_catalog_table.png|thumb|none|380 px|Example raster catalog.]]
In the first column of the table selects the raster. Then enter a ''Horizon ID'' and the associated material. There are two additional fields: ''Fill'' and ''Clip''. If the ''Fill'' field is turned on then the raster will be used in the interpolation process for the associated horizon. If the ''Clip'' field is turned on then any horizon surface with a horizon ID less than the associated horizon ID will be clipped to this surface. The following images show examples of the effect of the ''Clip'' field.


In the first column of the table selects the raster. Then enter a ''Horizon ID'' and the associated material. There are two additional fields: ''Fill'' and ''Clip''. If the ''Fill'' field is turned on then the raster will be used in the interpolation process for the associated horizon. If the ''Clip'' field is turned on then any horizon surface with a horizon id less than the associated horizon id will be clipped to this surface. The following images show examples of the effect of the ''Clip'' field.
:[[File:raster_catalog4.png|none|frame|Raster surfaces.]]


[[Image:raster_catalog4.png|none|frame|Raster surfaces.]]
The above figure shows a slice through raster surfaces that have been indexed with horizon IDs. Below we see the resulting stratigraphy if the ''Clip'' field is off (zero) for each raster.  


The above figure shows a slice through raster surfaces that have been indexed with horizon ids. Below we see the resulting stratigraphy if the clip field is off (zero) for each raster.  
:[[File:raster_catalog3.png|none|frame|Stratigraphy with the Clip field turned off.]]


The next two examples show how the stratigraphy changes when the ''Clip'' field is turned on.


[[Image:raster_catalog3.png|none|frame|Stratigraphy with the Clip field turned off.]]  
:[[File:raster_catalog1.png |none|frame |Stratigraphy with the Clip field on for horizon 4.]]
:[[File:raster_catalog2.png |none|frame |Stratigraphy with the Clip field on for horizon 3.]]


The final example shows a case where the ''Fill'' field is off and the ''Clip'' field is on.


The next 2 examples show how the stratigraphy changes when the Clip field is turned on.
:[[File:raster_catalog5.png |none|frame |Stratigraphy with the Fill-off and Clip-on for horizon 3.]]


==Horizons → Solids==
Raster catalogs are used to create solids using the [[GMS:Horizons to Solids|horizons to solids]] method. Each raster represents the top of a horizon. Right-click on the raster catalog in the Project Explorer and select the '''Horizons→Solids''' command to start the [[GMS:Horizons Wizard|''Horizons to Solids'']] wizard.


[[Image:raster_catalog1.png |none|frame |Stratigraphy with the Clip field on for horizon 4.]]
==Interpolation==
[[Image:raster_catalog2.png |none|frame |Stratigraphy with the Clip field on for horizon 3.]]
A raster catalog can be interpolated to other GMS objects (TINs, meshes etc) by right-clicking on the raster catalog and selecting the desired [[GMS:Interpolation Commands|interpolation command]]. Unlike interpolating from multiple selected rasters, when interpolating from a raster catalog, only one dataset will be created.
 
 
 
The final example shows a case where the Fill field is off and the Clip field is on.
 
[[Image:raster_catalog5.png |none|frame |Stratigraphy with the Fill-off and Clip-on for horizon 3.]]





Latest revision as of 20:07, 9 December 2019

GIS Module
GIS
Enabling ArcObjects
Converting GIS Data to Other Data Types
GIS to Feature Objects
Add Data
More
GIS Display Options
GIS Tool Palette
Images
Rasters
Raster Catalogs
GIS Commands

Horizons
HorCoverage.png
Links
Horizons
Horizons to Solids
Horizons to 3D Mesh
Horizons to UGrid
Horizons to HUF
Horizons Wizard
Including Borehole Cross Sections
Raster Catalog
Horizons Conceptual Model
Horizons Applications

A raster catalog is an attribute table that references rasters that are currently loaded into the GMS project. Raster catalogs are used for interpolation and to create solids from horizons.

Create a Raster Catalog

To create a raster catalog, simply select the desired rasters in the Project Explorer, right-click and select the New Raster Catalog command. A new "Scalar Dataset Active.svg Raster Catalog" item will then appear in the Project Explorer.

The figure below shows a sample of the Raster Catalog dialog.

Example of the Raster Catalog dialog.

In the first column of the table selects the raster. Then enter a Horizon ID and the associated material. There are two additional fields: Fill and Clip. If the Fill field is turned on then the raster will be used in the interpolation process for the associated horizon. If the Clip field is turned on then any horizon surface with a horizon ID less than the associated horizon ID will be clipped to this surface. The following images show examples of the effect of the Clip field.

Raster surfaces.

The above figure shows a slice through raster surfaces that have been indexed with horizon IDs. Below we see the resulting stratigraphy if the Clip field is off (zero) for each raster.

Stratigraphy with the Clip field turned off.

The next two examples show how the stratigraphy changes when the Clip field is turned on.

Stratigraphy with the Clip field on for horizon 4.
Stratigraphy with the Clip field on for horizon 3.

The final example shows a case where the Fill field is off and the Clip field is on.

Stratigraphy with the Fill-off and Clip-on for horizon 3.

Horizons → Solids

Raster catalogs are used to create solids using the horizons to solids method. Each raster represents the top of a horizon. Right-click on the raster catalog in the Project Explorer and select the Horizons→Solids command to start the Horizons to Solids wizard.

Interpolation

A raster catalog can be interpolated to other GMS objects (TINs, meshes etc) by right-clicking on the raster catalog and selecting the desired interpolation command. Unlike interpolating from multiple selected rasters, when interpolating from a raster catalog, only one dataset will be created.