GMS:Solid Properties: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
No edit summary
 
(15 intermediate revisions by the same user not shown)
Line 2: Line 2:
The ''Solid Properties'' dialog allows the user to edit/view attributes of the selected solid.  This dialog can be accessed by selecting a solid from the [[GMS:Project Explorer|Project Explorer]], right-clicking to access the pop up menu, and selecting the '''Properties''' command. It can also be accessed by double-clicking on a solid in the graphics window, or by selecting a solid and then selecting the '''Properties''' command from the ''Edit'' menu.
The ''Solid Properties'' dialog allows the user to edit/view attributes of the selected solid.  This dialog can be accessed by selecting a solid from the [[GMS:Project Explorer|Project Explorer]], right-clicking to access the pop up menu, and selecting the '''Properties''' command. It can also be accessed by double-clicking on a solid in the graphics window, or by selecting a solid and then selecting the '''Properties''' command from the ''Edit'' menu.


The following items can be edited in the properties dialog:
The following items can be edited in the ''Properties'' dialog:


*''Solid Name'' – Name of the solid.
*''Solid Name'' – Name of the solid.
*''Solid Material'' – Material associated with the solid. The list will only show materials created in the ''Materials'' dialog.
*''Solid Material'' – Material associated with the solid. The list will only show materials contained in the [[GMS:Materials|''Materials'']] dialog.
*''Begin Layer'' – Beginning grid layer assigned to solid used with the [[GMS:Solids to MODFLOW Command|'''Solids→MODFLOW''']] procedure.
*''Begin Layer'' – Beginning grid layer assigned to solid used with the [[GMS:Solids to MODFLOW Command|'''Solids→MODFLOW''']] procedure.
*''End Layer'' – Ending grid layer assigned to solid used with the '''Solids→MODFLOW''' procedure.
*''End Layer'' – Ending grid layer assigned to solid used with the '''Solids→MODFLOW''' procedure.
Line 11: Line 11:
*''Top cell bias'' – The percent to bias the thickness of the top cell with the '''Solids→MODFLOW''' procedure.
*''Top cell bias'' – The percent to bias the thickness of the top cell with the '''Solids→MODFLOW''' procedure.
*''Target min. cell thickness'' – Minimum cell thickness used with the '''Solids→MODFLOW''' procedure.
*''Target min. cell thickness'' – Minimum cell thickness used with the '''Solids→MODFLOW''' procedure.
[[File:Solids Properties.png|thumb|none|290 px|Example of the solids ''Properties'' dialog]]
:[[File:Solids Properties.png|thumb|none|290 px|Example of the solids ''Properties'' dialog]]


These items are display as information about the solid:
The following items are displayed as information about the solid and cannot be edited in the dialog:


*Solid ID
*''Number vertices'' – Total number of vertices used in the solid.
*Number vertices
*''Number triangles'' – Total number of traingle elements used in the solid.
*Number triangles
*''Max x'' – The maximum distance away from the origin on the x-axis.
*Max z
*''Min x'' – The minimum distance away from the origin on the x-axis.
*Min z
*''Max y'' – The maximum distance away from the origin on the y-axis.
*Centroid,x
*''Min y'' – The minimum distance away from the origin on the y-axis.
*Centroid,y
*''Max z'' – The maximum distance away from the origin on the z-axis.
*Centroid,z
*''Min z'' – The minimum distance away from the origin on the z-axis.
*Volume
*''Centroid,x'' – The point on the x-axis that is at the center of the solid.
*''Centroid,y'' – The point on the y-axis that is at the center of the solid.
*''Centroid,z'' – The point on the z-axis that is at the center of the solid.
*''Volume'' – The calculated volume of the solid.
*''Projection'' – The projection coordinates the solid is using.




Line 29: Line 33:
[[Category:Solids|Prop]]
[[Category:Solids|Prop]]
[[Category:GMS Dialogs|S]]
[[Category:GMS Dialogs|S]]
[[Category:Needs Update]]

Latest revision as of 15:12, 24 October 2017

Solid Module
Solids.png
Solid
Solid Properties
Solid Primitives
Solid Cross Sections
More
Boundary Matching
HUF Package
Horizons to Solids
Solid Display Options
Solid Module Tool Palette
Solids to HUF
Solids to Layered Mesh
Solids to MODFLOW Command
Solid Commands

The Solid Properties dialog allows the user to edit/view attributes of the selected solid. This dialog can be accessed by selecting a solid from the Project Explorer, right-clicking to access the pop up menu, and selecting the Properties command. It can also be accessed by double-clicking on a solid in the graphics window, or by selecting a solid and then selecting the Properties command from the Edit menu.

The following items can be edited in the Properties dialog:

  • Solid Name – Name of the solid.
  • Solid Material – Material associated with the solid. The list will only show materials contained in the Materials dialog.
  • Begin Layer – Beginning grid layer assigned to solid used with the Solids→MODFLOW procedure.
  • End Layer – Ending grid layer assigned to solid used with the Solids→MODFLOW procedure.
  • Use top cell bias– Option for using the top cell bias used with the Solids→MODFLOW procedure.
  • Top cell bias – The percent to bias the thickness of the top cell with the Solids→MODFLOW procedure.
  • Target min. cell thickness – Minimum cell thickness used with the Solids→MODFLOW procedure.
Example of the solids Properties dialog

The following items are displayed as information about the solid and cannot be edited in the dialog:

  • Number vertices – Total number of vertices used in the solid.
  • Number triangles – Total number of traingle elements used in the solid.
  • Max x – The maximum distance away from the origin on the x-axis.
  • Min x – The minimum distance away from the origin on the x-axis.
  • Max y – The maximum distance away from the origin on the y-axis.
  • Min y – The minimum distance away from the origin on the y-axis.
  • Max z – The maximum distance away from the origin on the z-axis.
  • Min z – The minimum distance away from the origin on the z-axis.
  • Centroid,x – The point on the x-axis that is at the center of the solid.
  • Centroid,y – The point on the y-axis that is at the center of the solid.
  • Centroid,z – The point on the z-axis that is at the center of the solid.
  • Volume – The calculated volume of the solid.
  • Projection – The projection coordinates the solid is using.