HY8:Contra Costa Basin: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
Line 2: Line 2:
The input variables required for this calculation is the following:
The input variables required for this calculation is the following:


* Baffle Block Height Ratio -- The ratio of the baffle block height to baffle block distance from the culvert.
* Baffle Block Height Ratio — The ratio of the baffle block height to baffle block distance from the culvert.
* End Sill Height to Maximum Depth Ratio -- ratio to determine the end sill height from the maximum depth.
* End Sill Height to Maximum Depth Ratio — ratio to determine the end sill height from the maximum depth.
* Basin Width -- The channel width is recommended for the basin width.
* Basin Width — The channel width is recommended for the basin width.




Line 13: Line 13:
Variables from the figure               
Variables from the figure               


* D -- Diameter of culvert
* D — Diameter of culvert
* y<sub>0</sub> -- Outlet depth
* y<sub>0</sub> &mdash; Outlet depth
* y<sub>2</sub> -- Approximate maximum water surface depth
* y<sub>2</sub> &mdash; Approximate maximum water surface depth
* y<sub>3</sub> -- Basin exit velocity
* y<sub>3</sub> &mdash; Basin exit velocity
* V<sub>0</sub> -- Outlet velocity
* V<sub>0</sub> &mdash; Outlet velocity
* V<sub>2</sub> -- Exit velocity
* V<sub>2</sub> &mdash; Exit velocity
* h<sub>1</sub> -- Height of small baffle
* h<sub>1</sub> &mdash; Height of small baffle
* h<sub>2</sub> -- Height of large baffle
* h<sub>2</sub> &mdash; Height of large baffle
* h<sub>3</sub> -- Height of end sill
* h<sub>3</sub> &mdash; Height of end sill
* L<sub>2</sub> -- Length from culvert exit to large baffle
* L<sub>2</sub> &mdash; Length from culvert exit to large baffle
* L<sub>3</sub> -- Length from large baffle to end sill
* L<sub>3</sub> &mdash; Length from large baffle to end sill
* L<sub>B</sub> -- Basin length
* L<sub>B</sub> &mdash; Basin length




{{HY8Main}}
{{HY8Main}}

Revision as of 19:47, 29 April 2013

Contra Costa Basin

The input variables required for this calculation is the following:

  • Baffle Block Height Ratio — The ratio of the baffle block height to baffle block distance from the culvert.
  • End Sill Height to Maximum Depth Ratio — ratio to determine the end sill height from the maximum depth.
  • Basin Width — The channel width is recommended for the basin width.


The following figures show the design of a Contra Costa basin.

HY8image16.jpg

Variables from the figure

  • D — Diameter of culvert
  • y0 — Outlet depth
  • y2 — Approximate maximum water surface depth
  • y3 — Basin exit velocity
  • V0 — Outlet velocity
  • V2 — Exit velocity
  • h1 — Height of small baffle
  • h2 — Height of large baffle
  • h3 — Height of end sill
  • L2 — Length from culvert exit to large baffle
  • L3 — Length from large baffle to end sill
  • LB — Basin length