HY8:Culvert Data

From XMS Wiki
Revision as of 16:16, 1 July 2011 by Cmsmemoe (talk | contribs)
Jump to navigationJump to search

Culvert data are entered by selecting the Input Properties option from the Culvert menu, or by right clicking on the culvert in the Project Explorer window and selecting Input Properties. The following culvert data are required:


Size


HY8image22.jpg


The site data for each culvert are also entered in the culvert data portion of the culvert properties window. The user has the option of entering culvert invert data or embankment toe data.


v • e
HY-8
Introduction:Getting Started   •   Layout   •   Vena Contracta   •   Building a Project   •   Locate Project   •   Culvert Crossing Data   •   Run Analysis   •   Report Generation
Crossing and Culvert Data:Crossings   •   Discharge Data   •   Roadway Data   •   Tailwater Data   •   Irregular Channel   •   Culvert Data   •   Site Data   •   Culvert Invert Data   •   Embankment Toe Data
AnalysisProject Units   •   Roadway Overtopping   •   Inlet Control Computations   •   Outlet Control Computations   •   Tables and Plots
Energy DissipationScour Hole Geometry   •   Increased Resistance   •   Tumbling Flow   •   USBR Type IX Baffled Apron   •   Drop Structures   •   Stilling Basins   •   Streambed Level Structures
MethodsAquatic Organism Passage   •   Low Flow Hydraulics
TroubleshootingDifferences from DOS HY-8   •   Limitations   •   HY-8 User Manual
Retrieved from "https://www.xmswiki.com/index.php?title=HY8:Culvert_Data&oldid=35229"