HY8:Culvert Invert Data

The culvert invert data option is used to enter known coordinates of culvert inverts. This option is generally used to analyze known, existing culverts. Coordinates are defined by the following input as seen in the figure below:

• Inlet Station -- station of culvert inlet invert
• Inlet Elevation -- elevation at culvert inlet invert
• Outlet Station -- station of culvert outlet invert, must be greater than the inlet station
• Outlet Elevation -- elevation at culvert outlet invert
• Number of Barrels -- the program default is 1, although this may be changed by the user.

Once the user defines the culvert invert data, the program computes the culvert barrel length along the culvert barrel, rather than horizontally between the inlet and outlet stations. If a horizontal slope (0%) is desired with inlet and outlet stations at the same elevation the program will automatically assign a slope value of 0.000001 (ft/ft, m/m) for computational purposes. The slope will be shown as zero in all output tables.

Related Topics

Introduction

• Introduction

Culvert Data

Culvert Data

• Culvert Data
• Shapes
• Material
• Plastic Pipe Materials
• Concrete Open-Bottom Arch
• Inlet Type
• Inlet Edge Conditions
• Inlet Depression
• Embedment Depth

Site Data

• Site Data Input Option
• Culvert Invert Data
• Embankment Toe Data