HY8:Culvert Invert Data

From XMS Wiki
Jump to navigationJump to search

The culvert invert data option is used to enter known coordinates of culvert inverts. This option is generally used to analyze known, existing culverts. Coordinates are defined by the following input as seen in the figure below:


  • Inlet Station -- station of culvert inlet invert
  • Inlet Elevation -- elevation at culvert inlet invert
  • Outlet Station -- station of culvert outlet invert, must be greater than the inlet station
  • Outlet Elevation -- elevation at culvert outlet invert
  • Number of Barrels -- the program default is 1, although this may be changed by the user.


HY8image37.gif


Once the user defines the culvert invert data, the program computes the culvert barrel length along the culvert barrel, rather than horizontally between the inlet and outlet stations. If a horizontal slope (0%) is desired with inlet and outlet stations at the same elevation the program will automatically assign a slope value of 0.000001 (ft/ft, m/m) for computational purposes. The slope will be shown as zero in all output tables.