HY8:Layout

From XMS Wiki
Revision as of 16:53, 1 December 2016 by Jcreer (talk | contribs)
Jump to navigationJump to search
Overview of the HY-8 layout

The main HY-8 window has many sections and areas to give quick access to data and tools.

Graphics Window

The Graphics Window is where data is rendered and data is manipulated using tools.

Project Explorer

The Project Explorer contains a hierarchical representation of the data associated with a modeling project. It is located at the left side of the HY-8 window by default, but it can be moved to anywhere on the window since it is a "dockable" toolbar. The Project Explorer contains a hierarchical representation of the data associated with a modeling project. The Project Explorer manages the data in multiple ways, including creation of new data objects, deleting data objects, and the control of display.

Menus

HY-8 has five menus: File, Display, Culvert, Window, and Help.

File

The File menu contains commands for opening and saving projects.

New
Deletes any data currently loaded into HY-8. Will bring up a prompt asking if wanting to save the project before deleting the data.
Open
Launches the Open dialog where projects or data can be imported into HY-8.
Close
Closes the current project loaded into HY-8. Will bring up a prompt asking if wanting to save the project before closing the project.
Save
Saves the the current project. If the project has not previously been saved, the Save dialog will appear where the project can be named and saved.
Save As
Opens up the Save As dialog where a duplicate of the project can be saved with a new name. Currently, projects can only be saved in the *.hy8 file format.
Print
Requires a crossing or other data to be selected for this command to be active. Brings up the Printing Crossing dialog. The dialog allows selecting the printer to send the data so and contains some formatting and page setup options.
Recent File
Will show a list of project recently saved in HY-8. If there are no projects recently saved in HY-8 this command will be inactive.
Exit
Closes the HY-8 program. Will prompt if wanting to save the current project before closing the HY-8 program.

Display

The Display menu contains commands to changing the display and viewing options.

Project Explorer
Options to show or hide the Project Explorer. This is turned on by default.
Status Bar
Hides or shows the status bar at the bottom of the layout.
Toolbars
This submenu brings up options to show or hide the following:
Macros
Shows or hides the general macros toolbar (WMSIcon New.png New, Open macro icon.png Open, Save macro icon.png Save, etc.).
Culvert
Shows or hides the culvert macros toolbar (NewCulverCrossingIcon.png New Culvert Crossing, CulverCrossingDataIcon.png Culvert Crossing Data, RunAnalysisIcon.png Run Analysis, etc.).
Views
Shows or hides the view macros toolbar (HY-8 SideViewIcon.png Side View, HY-8 FrontVewIcon.png Front View, HY-8 PlanVewIcon.png Plan View ).
Map Tools
Shows or hides the map toolbar (WMSIcon GIS Module.png Launch Map Viewer, HY-8 OpenImageIcon.png Open Image, etc.).
View
This submenu brings up the following commands for viewing:
Side View
Switches a side view, view looking down the x-axis, of the data in the Graphics Window.
Front View
Switches to a front view, view looking down the y-axis, of the data in the Graphics Window.
Plan View
Switches to a plan view, view looking down the z-axis, of the data in the Graphics Window.

Culvert

The Culvert menu contains commands for creating, editing, and viewing culvert and crossing data.

New Culvert Crossing
Opens the Crossing Data dialog where all of the necessary parameters can be defined for new crossings and culverts.
Culvert Crossing Data
Opens the Culvert/Crossing Data dialog where all of the necessary parameters can be edited for existing crossings and culverts.
Run Analysis
Starts the Run Analysis tool to view the analysis of the culvert hydraulics.
Run Energy Dissipation
Opens the Energy Dissipation dialog which allows several energy dissipating structures to be used with culverts.
Run AOP
Stream Simulation : Opens the Aquatic Organism Culvert Crossing Passage Using Stream Simulation dialog where parameters can be entered for AOP stream simulations.
Run Low Flow Hydraulics
Opens the Low Flow Hydraulics dialog.
Notes
Starts the Culvert Notes dialog where comments can be entered for the select culvert.
Create Report
Opens the Report Generation dialog to create a report file for one or more crossings.

Window

The Window menu contains commands for arranging the windows in the Main Graphics Window.

Cascade
Arranges windows in the Graphics Window to be stacked on top of each other and slightly offset from each other.
Tile
Arranges the windows in the Graphics Windows so each window can be fully seen.
Window List
This section of the menu will display all windows currently in the Graphics Window. Selecting a window listed here will bring the window to the front of the Graphics Window.

Help

The Help menu contains commands for opening documentation and gaining information about HY-8.

HY-8 Help
Opens the HY-8 users manual.
HY-8 Quick Start Documentation
Opens the HY-8 quick start tutorial; a PDF version of this wiki.
HDS-5 Documentation
Opens the HDS-5 documentation. (Schall, James D., Philip L. Thompson, Steve M. Zerges, Roger T. Kilgore, and Johnny L. Morris. Hydraulic design of highway culverts. No. FHWA-HIF-12-026. 2012.)
HEC-14 Documentation
Opens the HEC-14 documentation. (Thompson, Philip L., Murray L. Corry, F. J. Watts, Dennis L. Richards, J. Sterling Jones, and Joseph N. Bradley. Hydraulic design of energy dissipators for culverts and channels. No. HEC 14. 2006.)
HEC-26 Documentation
Opens the HEC-26 documentation: Culvert Design for Aquatic Organism Passage. (Kilgore, Roger T., Bart S. Bergendahl, and Rollin H. Hotchkiss. Culvert Design for Aquatic Organism Passage. No. HWA-HIF-11-008. 2010.)
TFHRC Report
Opens the TFHRC Report: Fish Passage in Large Culverts with Low Flows. (Zhai, Yuan, Amin Mohebbi, Roger Kilgore, Zhaoding Xie, and Jerry Shen. Fish Passage in Large Culverts with Low Flows. No. FHWA-HRT-14-064. 2014.)
Register HY-8
Opens the HY-8 registration page at aquaveo.com.
Contact Us
Check for Updates
Contacts aquaveo.com to see if a newer version of HY-8 is available.
About HY-8
Opens the About HY-8 dialog with information about the developers and the software build date.

Macros

Macros are shortcuts to commands available in the menus. The macros have been organized into four toolbars.

General Macros

  • WMSIcon New.png New – Clears any data currently loaded in HY-8.
  • Open macro icon.png Open – Starts the Open browser.
  • Save macro icon.png Save – Saves changes to the HY-8 project file.
  • Print macro icon in WMS.png Print – Opens the Print dialog.
  • File:HY8 HelpMacro.png Help – Opens the HY-8 users manual.

Culvert Macros

Views Macros

  • HY-8 SideViewIcon.png Side View – Switches a side view, view looking down the x-axis, of the data in the Graphics Window.
  • HY-8 FrontVewIcon.png Front View – Switches to a front view, view looking down the y-axis, of the data in the Graphics Window.
  • HY-8 PlanVewIcon.png Plan View – Switches to a plan view, view looking down the z-axis, of the data in the Graphics Window.

Map Tools Macros

  • WMSIcon GIS Module.png Launch Map Viewer – Brings up the Virtual Earth Map Locator where map data can be downloaded and imported into HY-8.
  • HY-8 OpenImageIcon.png Open Image – Brings up an Open dialog where a bitmap image can be imported into HY-8.
  • WMSIcon Delete.png Remove Image – Deletes the selected image file from the HY-8 project.
  • HY-8 SelectCrossingIcon.png Select Crossing
  • HY-8 AddCrossingIcon.png Add Crossing

Units

The Units combo box toolbar displays the current base unit definition. Units can be in "U.S. Customary Units" or "SI Units (Metric)". See Project Units for more information.

Outlet Control Options

The Outlet Control Option combo box toolbar allows two options: "Profiles" or "Full Flow". See Outlet Control Computations for more information.

Exit Loss Options

The Exit Loss Option combo box allows two options: "Standard Method" and "USU Method". See Exit Loss Options for more information.

Status Bar

This section displays actions being taken, some data information, or actions that need to taken.