HY8:Polynomial Coefficients: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
Line 237: Line 237:
-0.0000080574
-0.0000080574
|
|
[[File:HY8SouthDakotaSketch1.png]]
[[Image:HY8SouthDakotaSketch1.png|HY8SouthDakotaSketch1.png]]
|-
|-
| Sketch 2: 30 degree-flared wingwalls; top edge beveled at 45 degrees; 2, 3, and 4 multiple barrels
| Sketch 2: 30 degree-flared wingwalls; top edge beveled at 45 degrees; 2, 3, and 4 multiple barrels
Line 257: Line 257:
0.0000851484
0.0000851484
|
|
[[File:HY8SouthDakotaSketch2.png]]
[[Image:HY8SouthDakotaSketch2.png]]
|-
|-
| Sketch 3: 30 degree-flared wingwalls; top edge beveled at 45 degrees; 2:1 to 4:1 span-to-rise ratio
| Sketch 3: 30 degree-flared wingwalls; top edge beveled at 45 degrees; 2:1 to 4:1 span-to-rise ratio
Line 277: Line 277:
0.0001083949
0.0001083949
|
|
[[File:HY8SouthDakotaSketch3.png]]
[[Image:HY8SouthDakotaSketch3.png]]
|-
|-
| Sketch 4: 30 degree-flared wingwalls; top edge beveled at 45 degrees; 15 degrees skewed headwall with multiple barrels
| Sketch 4: 30 degree-flared wingwalls; top edge beveled at 45 degrees; 15 degrees skewed headwall with multiple barrels
Line 297: Line 297:
0.0000743575
0.0000743575
|
|
[[File:HY8SouthDakotaSketch4.png]]
[[Image:HY8SouthDakotaSketch4.png]]
|-
|-
| Sketch 5: 30 degree-flared wingwalls; top edge beveled at 45 degrees; 30 degrees to 45 degrees skewed headwall with multiple barrels
| Sketch 5: 30 degree-flared wingwalls; top edge beveled at 45 degrees; 30 degrees to 45 degrees skewed headwall with multiple barrels
Line 317: Line 317:
0.0000490932
0.0000490932
|
|
[[File:HY8SouthDakotaSketch5.png]]
[[Image:HY8SouthDakotaSketch5.png]]
|-
|-
| Sketches 6 & 7: 0 degree-flared wingwalls (extended sides); square-edged at crown and 0 degree-flared wingwalls (extended sides); top edge beveled at 45 degrees; 0- and 6-inch corner fillets
| Sketches 6 & 7: 0 degree-flared wingwalls (extended sides); square-edged at crown and 0 degree-flared wingwalls (extended sides); top edge beveled at 45 degrees; 0- and 6-inch corner fillets
Line 337: Line 337:
0.0001033337
0.0001033337
|
|
[[File:HY8SouthDakotaSketch6.png]]
[[Image:HY8SouthDakotaSketch6.png]]
[[File:HY8SouthDakotaSketch7.png]]
[[Image:HY8SouthDakotaSketch7.png]]
|-
|-
| Sketches 8 & 9: 0 degree-flared wingwalls (extended sides); top edge beveled at 45 degrees; 2, 3, and 4 multiple barrels and 0 degree-flared wingwalls (extended sides); top edge beveled at 45 degrees; 2:1 to 4:1 span-to-rise ratio
| Sketches 8 & 9: 0 degree-flared wingwalls (extended sides); top edge beveled at 45 degrees; 2, 3, and 4 multiple barrels and 0 degree-flared wingwalls (extended sides); top edge beveled at 45 degrees; 2:1 to 4:1 span-to-rise ratio
Line 358: Line 358:
0.0001078198
0.0001078198
|
|
[[File:HY8SouthDakotaSketch8.png]]
[[Image:HY8SouthDakotaSketch8.png]]
[[File:HY8SouthDakotaSketch9.png]]
[[Image:HY8SouthDakotaSketch9.png]]
|-
|-
| Sketches 10 & 11: 0 degree-flared wingwalls (extended sides); crown rounded at 8-inch radius; 0- and 6-inch corner fillets and 0 degree-flared wingwalls (extended sides); crown rounded at 8-inch radius; 12-inch corner fillets
| Sketches 10 & 11: 0 degree-flared wingwalls (extended sides); crown rounded at 8-inch radius; 0- and 6-inch corner fillets and 0 degree-flared wingwalls (extended sides); crown rounded at 8-inch radius; 12-inch corner fillets
Line 379: Line 379:
0.0000642284
0.0000642284
|
|
[[File:HY8SouthDakotaSketch10.png]]
[[Image:HY8SouthDakotaSketch10.png]]
[[File:HY8SouthDakotaSketch11.png]]
[[Image:HY8SouthDakotaSketch11.png]]
|-
|-
| Sketch 12: 0 degree-flared wingwalls (extended sides); crown rounded at 8-inch radius; 12-inch corner fillets; 2, 3, and 4 multiple barrels
| Sketch 12: 0 degree-flared wingwalls (extended sides); crown rounded at 8-inch radius; 12-inch corner fillets; 2, 3, and 4 multiple barrels
Line 400: Line 400:
0.0000423592
0.0000423592
|
|
[[File:HY8SouthDakotaSketch12.png]]
[[Image:HY8SouthDakotaSketch12.png]]
|-
|-
| Sketch 13: 0 degree-flared wingwalls (extended sides); crown rounded at 8-inch radius; 12-inch corner fillets; 2:1 to 4:1 span-to-rise ratio.
| Sketch 13: 0 degree-flared wingwalls (extended sides); crown rounded at 8-inch radius; 12-inch corner fillets; 2:1 to 4:1 span-to-rise ratio.
Line 420: Line 420:
0.0000655665
0.0000655665
|
|
[[File:HY8SouthDakotaSketch13.png]]
[[Image:HY8SouthDakotaSketch13.png]]
|}
|}


Line 426: Line 426:
* Thiele, Elizabeth A.  Culvert Hydraulics: Comparison of Current Computer Models.  (pp. 121-126), [http://etd.byu.edu Brigham Young University Master's Thesis] (2007).
* Thiele, Elizabeth A.  Culvert Hydraulics: Comparison of Current Computer Models.  (pp. 121-126), [http://etd.byu.edu Brigham Young University Master's Thesis] (2007).
* [http://fhwicsint01.fhwa.dot.gov/publications/research/infrastructure/hydraulics/06138/ '''Effects of Inlet Geometry on Hydraulic Performance of Box Culverts'''] (FHWA Publication No. FHWA-HRT-06-138, October 2006)
* [http://fhwicsint01.fhwa.dot.gov/publications/research/infrastructure/hydraulics/06138/ '''Effects of Inlet Geometry on Hydraulic Performance of Box Culverts'''] (FHWA Publication No. FHWA-HRT-06-138, October 2006)


== Table 6. Arch HW/D Values. ==
== Table 6. Arch HW/D Values. ==

Revision as of 23:46, 19 July 2011

For circular, box, elliptical, pipe arch, and concrete open-bottom arch (commonly called CON/SPAN) culverts, polynomial coefficients, found in Tables 1-5, are utilized in the inlet control headwater computations. Tables 6-10 show the HW/D points A(1) through A(10) for interpolation. Each row of coefficients represents different entrance conditions for different culvert shapes.


Table 1. Polynomial Coefficients - Circular

HY8Poly Table 1.JPG

EQ #'s: REFERENCE

1-9 : Calculator Design Series (CDS) 3 for TI-59, FHWA, 198O, page 60

1-10: Hydraulic Computer Program (HY) 1, FHWA, 1969, page 18



Table 2. Polynomial Coefficients - Box

HY8Poly Table 2.JPG

EQ #'s: REFERENCE

1-6: Hydraulic Computer Program (HY) 6, FHWA, 1969, subroutine BEQUA

1,4,5: Hydraulic Computer Program (HY) 3, FHWA, 1969, page 16

1,3,4,6: Calculator Design Series (CDS) 3 for TI-59, FHWA, 198O, page 16



Table 3. Polynomial Coefficients - Ellipse

HY8Poly Table 3.JPG

EQ #'s: REFERENCE

27-30: Calculator Design Series (CDS) 4 for TI-59, FHWA, 1982, page 20

31-33: Calculator Design Series (CDS) 4 for TI-59, FHWA, 1982, page 22



Table 4. Polynomial Coefficients - Pipe Arch

HY8Polynomial PipeArch.JPG

EQ #'s: REFERENCE

12-23: Calculator Design Series (CDS) 4 for TI-59, FHWA, 1982, page 17

24-26: Calculator Design Series (CDS) 4 for TI-59, FHWA, 1982, page 24

12,16,20: Hydraulic Computer Program (HY) 2, FHWA, 1969, page 17


Table 5. Polynomial Coefficients - Concrete Open-Bottom Arch

Span:Rise Ratio Wingwall Angle (Inlet Edge Condition) KE SR A BS C DIP EE F Diagram/Notes
2:1

0 Degrees (Mitered to Conform to Slope)

0.7

0.0

0.0356

0.5701

-0.162

0.0322

-0.0023

0.00006

0DegreeWingwallConspanCulvertDiagram.png

2:1 Coefficients are used if the span:rise ratio is less than or equal to 3:1.

2:1

45 Degrees (45-degree Wingwall)

0.5

0.0

0.0393

0.5828

-0.1518

0.0284

-0.002

0.00005

45DegreeWingwallConspanCulvertDiagram.png

2:1 Coefficients are used if the span:rise ratio is less than or equal to 3:1.

2:1

90 Degrees (Square Edge with Headwall)

0.5

0.0

0.0459

0.5762

-0.1436

0.0269

-0.0019

0.00005

90DegreeWingwallConspanCulvertDiagram.png

2:1 Coefficients are used if the span:rise ratio is less than or equal to 3:1.

4:1

0 Degrees (Mitered to Conform to Slope)

0.7

0.0

0.0309

0.5211

-0.1258

0.0207

-0.0013

0.00003

0DegreeWingwallConspanCulvertDiagram.png

4:1 coefficients are used if the span:rise ratio is greater than 3:1

4:1

45 Degrees (45-degree Wingwall)

0.5

0.0

0.0318

0.5446

-0.1467

0.0273

-0.0019

0.00005

45DegreeWingwallConspanCulvertDiagram.png

4:1 coefficients are used if the span:rise ratio is greater than 3:1

4:1

90 Degrees (Square Edge with Headwall)

0.5

0.0

0.0283

0.5739

-0.1584

0.0292

-0.002

0.00005

90DegreeWingwallConspanCulvertDiagram.png

4:1 coefficients are used if the span:rise ratio is greater than 3:1

References for Concrete Open-bottom Arch polynomial coefficients:

  • Thiele, Elizabeth A. Culvert Hydraulics: Comparison of Current Computer Models. (pp. 121-126), Brigham Young University Master's Thesis (2007).
  • Chase, Don. Hydraulic Characteristics of CON/SPAN Bridge Systems. Submitted Study and Report (1999)


Table 6. Polynomial Coefficients - South Dakota Concrete Box

Description KE SR A BS C DIP EE F Diagram/Notes
Sketch 1: 30 degree-flared wingwalls; top edge beveled at 45 degrees

0.5

0.5

0.0176998563

0.5354484847

-0.1197176702

0.0175902318

-0.0005722076

-0.0000080574

HY8SouthDakotaSketch1.png

Sketch 2: 30 degree-flared wingwalls; top edge beveled at 45 degrees; 2, 3, and 4 multiple barrels

0.5

0.5

0.0506647261

0.5535393634

-0.1599374238

0.0339859269

-0.0027470036

0.0000851484

HY8SouthDakotaSketch2.png

Sketch 3: 30 degree-flared wingwalls; top edge beveled at 45 degrees; 2:1 to 4:1 span-to-rise ratio

0.5

0.5

0.0518005829

0.5892384653

-0.1901266252

0.0412149379

-0.0034312198

0.0001083949

HY8SouthDakotaSketch3.png

Sketch 4: 30 degree-flared wingwalls; top edge beveled at 45 degrees; 15 degrees skewed headwall with multiple barrels

0.5

0.5

0.2212801152

0.6022032341

-0.1672369732

0.0313391792

-0.0024440549

0.0000743575

HY8SouthDakotaSketch4.png

Sketch 5: 30 degree-flared wingwalls; top edge beveled at 45 degrees; 30 degrees to 45 degrees skewed headwall with multiple barrels

0.5

0.5

0.2431604850

0.5407556631

-0.1267568901

0.0223638322

-0.0016523399

0.0000490932

HY8SouthDakotaSketch5.png

Sketches 6 & 7: 0 degree-flared wingwalls (extended sides); square-edged at crown and 0 degree-flared wingwalls (extended sides); top edge beveled at 45 degrees; 0- and 6-inch corner fillets

0.5

0.5

0.0493946080

0.7138391179

-0.2354755894

0.0473247331

-0.0036154348

0.0001033337

HY8SouthDakotaSketch6.png HY8SouthDakotaSketch7.png

Sketches 8 & 9: 0 degree-flared wingwalls (extended sides); top edge beveled at 45 degrees; 2, 3, and 4 multiple barrels and 0 degree-flared wingwalls (extended sides); top edge beveled at 45 degrees; 2:1 to 4:1 span-to-rise ratio

0.5

0.5

0.1013668008

0.6600937637

-0.2133066786

0.0437022641

-0.0035224589

0.0001078198

HY8SouthDakotaSketch8.png HY8SouthDakotaSketch9.png

Sketches 10 & 11: 0 degree-flared wingwalls (extended sides); crown rounded at 8-inch radius; 0- and 6-inch corner fillets and 0 degree-flared wingwalls (extended sides); crown rounded at 8-inch radius; 12-inch corner fillets

0.5

0.5

0.0745605288

0.6533033536

-0.1899798824

0.0350021004

-0.0024571627

0.0000642284

HY8SouthDakotaSketch10.png HY8SouthDakotaSketch11.png

Sketch 12: 0 degree-flared wingwalls (extended sides); crown rounded at 8-inch radius; 12-inch corner fillets; 2, 3, and 4 multiple barrels

0.5

0.5

0.1321993533

0.5024365440

-0.1073286526

0.0183092064

-0.0013702887

0.0000423592

HY8SouthDakotaSketch12.png

Sketch 13: 0 degree-flared wingwalls (extended sides); crown rounded at 8-inch radius; 12-inch corner fillets; 2:1 to 4:1 span-to-rise ratio.

0.5

0.5

0.1212726739

0.6497418331

-0.1859782730

0.0336300433

-0.0024121680

0.0000655665

HY8SouthDakotaSketch13.png

References for South Dakota Concrete Box polynomial coefficients:

Table 6. Arch HW/D Values.

HY8Arch Table.JPG


Table 7. High Profile Arch HW/D Values.

HY8Arch High Profile.JPG


Table 8. Low Profile Arch HW/D Values.

HY8Arch Low Profile Table.JPG


Table 9. Metal Box HW/D Values.

File:HY8Metal Box.JPG


Table 10. User Defined HW/D Values.

HY8User Defined Table.JPG