HY8:Roadway Overtopping

From XMS Wiki
Revision as of 20:47, 6 October 2016 by Jcreer (talk | contribs) (Jcreer moved page HY-8:Roadway Overtopping to HY8:Roadway Overtopping)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search

When the headwater elevation exceeds the elevation of the roadway, overtopping will occur as shown below. When overtopping is simulated, the program computes the discharge for each culvert and for the roadway that will result in the same headwater elevation. An overtopping analysis will be completed for every crossing, and, if overtopping occurs, the corresponding flow values will be displayed.


HY8Overtopping.JPG


v • e
HY-8
Introduction:Getting Started   •   Layout   •   Vena Contracta   •   Building a Project   •   Locate Project   •   Culvert Crossing Data   •   Run Analysis   •   Report Generation
Crossing and Culvert Data:Crossings   •   Discharge Data   •   Roadway Data   •   Tailwater Data   •   Irregular Channel   •   Culvert Data   •   Site Data   •   Culvert Invert Data   •   Embankment Toe Data
AnalysisProject Units   •   Roadway Overtopping   •   Inlet Control Computations   •   Outlet Control Computations   •   Tables and Plots
Energy DissipationScour Hole Geometry   •   Increased Resistance   •   Tumbling Flow   •   USBR Type IX Baffled Apron   •   Drop Structures   •   Stilling Basins   •   Streambed Level Structures
MethodsAquatic Organism Passage   •   Low Flow Hydraulics
TroubleshootingDifferences from DOS HY-8   •   Limitations   •   HY-8 User Manual
Retrieved from "https://www.xmswiki.com/index.php?title=HY8:Roadway_Overtopping&oldid=113121"