HY8:Run Analysis: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
 
 
(18 intermediate revisions by 2 users not shown)
Line 1: Line 1:
==Run Analysis==
==Run Analysis==
After defining the culvert and crossing data the culvert hydraulics are analyzed, including balancing flow through multiple culverts and [[WMS:HY-8 Roadway Overtopping|over the roadway.]]  Viewing the analysis of a crossing can be done by right clicking on the desired crossing in the Project Explorer window and selecting Analyze Crossing as seen in the figure below.  The Analyze Crossing feature can also be accessed for the currently selected crossing from the Culvert Crossing Data Window, the Culvert menu, or from the culvert toolbar .   
After defining the culvert and crossing data the culvert hydraulics are analyzed, including balancing flow through multiple culverts and [[HY8:Roadway Overtopping|over the roadway.]]  Viewing the analysis of a crossing can be done by right-clicking on the desired crossing in the Project Explorer window and selecting '''Analyze Crossing''' as seen in the figure below.  The ''Analyze Crossing'' feature can also be accessed for the currently selected crossing from the ''Culvert Crossing Data Window'', the ''Culvert'' menu, or from the culvert toolbar [[File:RunAnalysisIcon.png]].   


During the analysis the program completes the necessary hydraulic computations after which the overtopping performance table will be displayed.  A [[HY8:Crossing Summary|summary of flows]] at the crossing will be displayed, including any overtopping flows if they occur.  While viewing the analysis, it also possible to view individual [[HY8:Culvert Summary|culvert summary tables]], [[HY8:Water Surface Profiles|water surface profiles]], the [[HY8:Tapered Inlet|tapered inlet table]], as well as a [[HY8:Customized|customized table]] made up of any of the parameters computed during the analysis.
 
During the analysis the program completes the necessary hydraulic computations after which the overtopping performance table will be displayed.  A [[WMS:HY-8 Crossing Summary|summary of flows]] at the crossing will be displayed, including any overtopping flows if they occur.  While viewing the analysis the user will also be able to view individual [[WMS:Culvert Summary|culvert summary tables]], [[WMS:HY-8 Water Surface Profiles|water surface profiles]], the [[WMS:HY-8 Improved Inlet|improved inlet table]], as well as a [[WMS:HY-8 Customized|customized table]] made up of any of the parameters computed during the analysis.


   
   
Line 10: Line 8:




{{hide in print|
{{HY8Main}}
==''Related Topics''==
[[Category:HY-8 General Information|R]]
 
[[Category:HY-8 Analysis|R]]
'''[[WMS:HY-8|HY-8 Main Page]]'''
 
===Introduction===
* [[WMS:HY-8|Introduction]]
* [[WMS:HY-8 Getting Started|HY-8 Getting Started]]
* [[WMS:HY-8 Differences from DOS HY-8|Differences from DOS HY-8]]
* [[WMS:HY-8 Limitations|Limitations]]
====Building a Project====
:* [[WMS:HY-8 Building a Project|Building a Project]]
:* [[WMS:HY-8 Locate Project|Locate Project]]
:* [[WMS:HY-8 Culvert Crossing Data|Culvert Crossing Data]]
:* [[WMS:HY-8 Run Analysis|Run Analysis]]
:* [[WMS:HY-8 Report Generation|Report Generation]]
}}

Latest revision as of 15:41, 7 October 2016

Run Analysis

After defining the culvert and crossing data the culvert hydraulics are analyzed, including balancing flow through multiple culverts and over the roadway. Viewing the analysis of a crossing can be done by right-clicking on the desired crossing in the Project Explorer window and selecting Analyze Crossing as seen in the figure below. The Analyze Crossing feature can also be accessed for the currently selected crossing from the Culvert Crossing Data Window, the Culvert menu, or from the culvert toolbar RunAnalysisIcon.png.

During the analysis the program completes the necessary hydraulic computations after which the overtopping performance table will be displayed. A summary of flows at the crossing will be displayed, including any overtopping flows if they occur. While viewing the analysis, it also possible to view individual culvert summary tables, water surface profiles, the tapered inlet table, as well as a customized table made up of any of the parameters computed during the analysis.


HY8image31.jpg


v • e
HY-8
Introduction:Getting Started   •   Layout   •   Vena Contracta   •   Building a Project   •   Locate Project   •   Culvert Crossing Data   •   Run Analysis   •   Report Generation
Crossing and Culvert Data:Crossings   •   Discharge Data   •   Roadway Data   •   Tailwater Data   •   Irregular Channel   •   Culvert Data   •   Site Data   •   Culvert Invert Data   •   Embankment Toe Data
AnalysisProject Units   •   Roadway Overtopping   •   Inlet Control Computations   •   Outlet Control Computations   •   Tables and Plots
Energy DissipationScour Hole Geometry   •   Increased Resistance   •   Tumbling Flow   •   USBR Type IX Baffled Apron   •   Drop Structures   •   Stilling Basins   •   Streambed Level Structures
MethodsAquatic Organism Passage   •   Low Flow Hydraulics
TroubleshootingDifferences from DOS HY-8   •   Limitations   •   HY-8 User Manual
Retrieved from "https://www.xmswiki.com/index.php?title=HY8:Run_Analysis&oldid=113239"