HY8:Saint Anthony Falls (SAF Stilling Basin)

From XMS Wiki
Revision as of 15:07, 10 October 2016 by Jcreer (talk | contribs) (Jcreer moved page HY-8:Saint Anthony Falls (SAF Stilling Basin) to HY8:Saint Anthony Falls (SAF Stilling Basin))
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search

The input variables required for this calculation is the following:

  • Shape (Flared or Rectangular)
  • Sidewall Flare — This will only apply if the basin has a flared shape


The following figure shows a Saint Anthony Falls stilling basin.

HY8image14.jpg

Variables from the figure

  • WB — Basin width
  • WB2 — Basin width at the baffle row
  • WB3 — Basin width at the sill
  • Y1 — height of the chute blocks
  • LB — Length of the basin
  • Z *mdash; basin flare

HY8image15.jpg

Variables from the figure

  • Y1 — height of the chute blocks
  • Y2 — Conjugate height
  • Y3 — height of the chute blocks
  • z1 — elevation of basin floor