HY8:USBR Type VI Impact Basin: Difference between revisions

From XMS Wiki
Jump to navigationJump to search
No edit summary
 
 
(5 intermediate revisions by 2 users not shown)
Line 1: Line 1:
===USBR Type VI Impact Basin===
==USBR Type VI Impact Basin==
No input variables are required for this calculation.
No input variables are required for this calculation.




The following figures show a USBR Type VI impact basin.
The following figures show a USBR Type VI impact basin.
Line 10: Line 9:
Variables from the figure               
Variables from the figure               


* WB -- Required basin width
* W<sub>B</sub> &mdash; Required basin width
* W1 -- Geometry design variable
* W<sub>1</sub> &mdash; Geometry design variable
* h1 through h5 -- Geometry design variable
* h<sub>1</sub> through h<sub>5</sub> &mdash; Geometry design variable
* t1 through t5 -- Geometry design variable
* t<sub>1</sub> through t<sub>5</sub> &mdash; Geometry design variable
* L1 and L2 -- Geometry design variable
* L<sub>1</sub> and L<sub>2</sub> &mdash; Geometry design variable
* L -- Length of the Basin
* L &mdash; Length of the Basin




{{HY8Main}}
{{HY8Main}}
[[Category:Energy Dissipators|U]]

Latest revision as of 14:50, 11 October 2016

USBR Type VI Impact Basin

No input variables are required for this calculation.


The following figures show a USBR Type VI impact basin.

HY8image19.jpg

Variables from the figure

  • WB — Required basin width
  • W1 — Geometry design variable
  • h1 through h5 — Geometry design variable
  • t1 through t5 — Geometry design variable
  • L1 and L2 — Geometry design variable
  • L — Length of the Basin


v • e
HY-8
Introduction:Getting Started   •   Layout   •   Vena Contracta   •   Building a Project   •   Locate Project   •   Culvert Crossing Data   •   Run Analysis   •   Report Generation
Crossing and Culvert Data:Crossings   •   Discharge Data   •   Roadway Data   •   Tailwater Data   •   Irregular Channel   •   Culvert Data   •   Site Data   •   Culvert Invert Data   •   Embankment Toe Data
AnalysisProject Units   •   Roadway Overtopping   •   Inlet Control Computations   •   Outlet Control Computations   •   Tables and Plots
Energy DissipationScour Hole Geometry   •   Increased Resistance   •   Tumbling Flow   •   USBR Type IX Baffled Apron   •   Drop Structures   •   Stilling Basins   •   Streambed Level Structures
MethodsAquatic Organism Passage   •   Low Flow Hydraulics
TroubleshootingDifferences from DOS HY-8   •   Limitations   •   HY-8 User Manual
Retrieved from "https://www.xmswiki.com/index.php?title=HY8:USBR_Type_VI_Impact_Basin&oldid=113407"