HY8:USBR Type VI Impact Basin

From XMS Wiki
Revision as of 16:29, 1 July 2011 by Cmsmemoe (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search

USBR Type VI Impact Basin

No input variables are required for this calculation.


The following figures show a USBR Type VI impact basin.

HY8image19.jpg

Variables from the figure

  • WB -- Required basin width
  • W1 -- Geometry design variable
  • h1 through h5 -- Geometry design variable
  • t1 through t5 -- Geometry design variable
  • L1 and L2 -- Geometry design variable
  • L -- Length of the Basin


v • e
HY-8
Introduction:Getting Started   •   Layout   •   Vena Contracta   •   Building a Project   •   Locate Project   •   Culvert Crossing Data   •   Run Analysis   •   Report Generation
Crossing and Culvert Data:Crossings   •   Discharge Data   •   Roadway Data   •   Tailwater Data   •   Irregular Channel   •   Culvert Data   •   Site Data   •   Culvert Invert Data   •   Embankment Toe Data
AnalysisProject Units   •   Roadway Overtopping   •   Inlet Control Computations   •   Outlet Control Computations   •   Tables and Plots
Energy DissipationScour Hole Geometry   •   Increased Resistance   •   Tumbling Flow   •   USBR Type IX Baffled Apron   •   Drop Structures   •   Stilling Basins   •   Streambed Level Structures
MethodsAquatic Organism Passage   •   Low Flow Hydraulics
TroubleshootingDifferences from DOS HY-8   •   Limitations   •   HY-8 User Manual
Retrieved from "https://www.xmswiki.com/index.php?title=HY8:USBR_Type_VI_Impact_Basin&oldid=35273"